Children quickly lose interest in old toys.And not every parent can buy every week the innovations of technical progress. And even to the most modern radio-controlled models, children's interest is rapidly weakening. Therefore, an excellent option will be toys made by themselves. This will instill a child's love of work and develop a small motor skills. And if you do not only decorative products, but toys that carry some kind of interactivity, then interest in such a creation will not weaken during a month. In this article, you will learn how to make a boomerang-origami with your hands, well, or the hands of a child.
A simple model
How to make an origami boomerang? The easiest way is to fold it from A4 paper.
- To do this, make the sheet square.
- We take one corner and pull it to the opposite side.
- The remaining sheet from below is carefully cut or torn off with a ruler.
- Now you can proceed directly to the simulation. To make it easier to work, you need to fold the square in half along and across, and then unfold the resulting design.
- These were preparatory actions to make the paper more plastic.
- The next step is the separation of the excess half. It can be cut off or neatly torn.
- The corners of the remaining part of the sheet are pulled to the center. And again we are engaged in preparatory folds.
- The upper corner of the triangle must be lowered and lifted back. Now, the right part of the structure through the formed center is bent to the left side.
- We make the same maneuver with the left side.
- The corner formed in the right side is bent inwards and straightened.
- Boomerang-origami is almost ready, it remains to perform the final actions.
- We put the finished construction "horns" to ourselves. Lower corners of the center are tightened to each other, and the upper part is bent.
Boomerang is ready, below is a detailed visual cheat sheet.
![boomerang origami](/images/hobbi/bumerang-origami-delaem-s-detmi.jpg)
Decor
Decorate a paper product is not worth it, because fromthis will make it heavier and stop flying. It is better to make a boomerang from a beautiful paper at once. For this purpose, you can use a wrapper from gifts. And you can glue light sequins that will be fun to shine in the sun.
![origami](/images/hobbi/bumerang-origami-delaem-s-detmi_2.jpg)
Complex model
A beautiful boomerang origami with their own hands is easy to make. But it takes a little patience.
- To begin, we will prepare an even number of sheets. It is advisable that there are at least eight of them. Next, according to the scheme described above, we make a square from each paper rectangle.
- Now we add all the angles of one of the squares inCentre. Turn the paper model to an angle to yourself and pull the top two corners to the center. As a result, we should get two triangles: one big at the top, another small at the bottom.
- A small triangle is wrapped back. If everything was done correctly, you should have one big triangle in front of you. Fold it in half. One part of the model is ready.
- We repeat this operation seven more times or as many leaflets as were prepared.
- The last stage is gluing.Rectangular triangles are glued behind the lower, indirect angle between themselves. As a result, you should get the model, as in the picture below. With the proviso that another set of triangles was added here for the decor. Particularly painstaking fans of paper creativity can repeat this decorative element. But keep in mind that the boomerang-origami flies better if it weighs less.
Boomerang of cardboard
Boomerang-origami from a thick paper can collect even a child. The scheme is very simple.
- It is necessary to cut out three rectangles. For beauty and better flight, all sharp ends need to be rounded, but you can not do it.
- At the end of each detail, you need to draw a small square, which one side rests against the center, and the other - in the free edge. Carefully cut out the geometric hole.
- The next step is to insert the parts into the formed grooves. In order to keep the product better, you can fasten it with a paper band or glue.
Boomerang-origami is ready.To make the cardboard design look nicer, it can be painted with pencils or felt-tip pens. Paints do not need to be used, since the upper paper layer can be deformed.
Boomerang on a stick
Boomerang origami from paper on a stick isstandard turntable. These are sold in a children's park on City Day or on public holidays. To build such an origami construction by your own hands is very simple. You can use any of the schemes above and assemble the boomerang itself. In his center you need to insert a wand. For this purpose, perfect wooden skewers, which you can buy at any grocery store. Attach the wand to the paper base with glue. The boomerang is ready.
It's easy to launch, you unwind itHand a wand and run a paper structure in a free flight. To the product looked festive, to the corners of the boomerang, you can paste a string with beads or light beads.