How to knit reinforcement for a foundation: recommendations

If you are interested in the question of how to knitreinforcement for the foundation, it is worth to know that this is an organized workflow, requiring compliance with the correctness of the mating and a certain order. First, each element is prepared for installation, and if one or more of them are defective, they must be cleaned and straightened beforehand. Next, the sling is performed, then each element is fed directly to the mating site. Then the elements are installed in the correct design position, after which you can start to knit. This is worth telling in more detail.

How to knit reinforcement for a foundation: the work process

The mating procedure is carried out with the help ofmetal wire of a certain diameter, as well as by means of attachment points, that is, mounting hooks. Folding of the rods is overlapped, after which their knocks are connected in the middle and along the edges with the help of steel wire. To avoid rupture of the wire at the junctions, its diameter must be selected correctly, in full compliance with the regulations. The mating procedure can be performed with a gun or manually. The first option is considered optimal, since it is performed in an automatic mode, does not require additional work and saves time. It increases the speed of work and the binding force, which positively affects the quality of the result obtained. Manual binding is the process by which binding is done by means of a special hook. This method has a drawback - significant time costs. If you are interested in how to knit reinforcement for a foundation, then it should be said that this can be done with the help of special staples available for purchase in a specialized building store. Very often mating is done for small houses, as they rely on the insignificant weight of the structure on the erected foundation.

Talking about how to properly knit armature,It is also worth noting that for multi-apartment buildings, the fittings are made by welding. Such a method is not devoid of shortcomings. First, we are talking about a large amount of work, requiring an additional number of welders. The use of electric welding causes the strength of the reinforcement to decrease, which is due to the effect of elevated temperatures on it. While welding increases the stiffness of the resulting structure, when it is sealed by a vibrator, it often happens that the integrity of the welded joints at the joints is disrupted.

How to properly knit reinforcement for a foundation,so as not to lose integrity? Increasingly, for these purposes, we apply the method of knitting by staples or wire in the formation of the framework. Due to this, the design obtains the optimum degree of connection, reduces the risk of fracture of the reinforcement in the process of pouring concrete and its subsequent compaction.

Now you not only know how to knit reinforcement for a foundation, but also has an idea of ​​how to do it correctly and qualitatively.