The jack is an indispensable part of eachmotorist. On the road, sometimes unforeseen circumstances occur, including a puncture of the wheel. Therefore, the jack must be in the trunk of every vehicle, especially if you are going on a long journey. In addition, this mechanism will be an indispensable element in the case of replacement of the wheel drive. For today in autoshop it is possible to find set of kinds of jacks from various firms-manufacturers. In this article, we'll figure out how the hydraulic jack works and how it differs.
Purpose and construction
Any jack performs a lifting functioncar at a certain height. But the hydraulic jack device has a certain feature, which is the height of the lift. This mechanism can lift the car up by 30-50 centimeters. At the same time, it is widely used among owners of SUVs, minibuses and low-tonnage trucks. By its design, it differs somewhat from mechanical analogs. Thanks to the hydraulic mechanism, a person can lift a three-ton machine, applying the forces that would be needed to lift the car. Also, such devices are widely used in service stations, car centers and tire shops.
What are the differences of hydraulics
To date, all the rollingincluding the hydraulic jack, differ in their load-carrying capacity. These devices can be designed for loading in two, three, four or even five tons. Usually the maximum load of the mechanism is marked on the shell of the structure. As a rule, vehicles designed for loading up to 2 tons are used to lift cars. But among our motorists, few people get a hydraulic jack for their cars, at least because for its price you can buy two mechanical jacks that will be equally functional. Three-tone instruments are widely used among owners of off-road vehicles. Five-ton jacks are designed for small- and medium-tonnage trucks, including buses and minibuses. Also, 5-ton mechanisms can be seen at each service station. They are able to raise the car to a height of one meter
Lifting height
The second difference between these mechanisms is, of course,the same, the height of the ascent. Most often, this figure can be seen in the model of the jack itself. Thus, if a jack hydraulic bottle is labeled 195-350, which means that the lifting mechanism has a range of 195 to 350 millimeters. For a passenger car, this height will be extremely large - such a device simply does not climb through the ground clearance of the car. With this marking, the jack is intended for off-road vehicles. For small trucks, a mechanism with a marking of 200-500 will go. That is, such a hydraulic jack can lift the car to a height of 50 centimeters. This, perhaps, is the whole difference of hydraulics.
