How to paste the film on the phone correctly. Tips and Tricks

Когда вы приобретаете новый мобильный телефон, то his screen is simply amazing with perfect smoothness. Alas, this effect lasts not so long with regular active use of the device. It invariably begins to appear small scratches, chips and other kinds of damage.

In addition, the display dims because of the constantcontact with the skin of the fingers and the stylus. To keep it in its original form for as long as possible, you need to acquire such a useful accessory, like a protective film on the phone screen.

Advantages of it quite a lot.Compared with the case, the film does not make the device bulky, nor does it muffle the sound of the speakers. At the same time, it perfectly protects the screen from direct exposure and gives it additional gloss. However, in recent years, matte film has become popular as well. With its help, the load on the eyes decreases while working with the device. In addition, this kind of film eliminates sunlight glare. But the surface is already losing its smoothness.

How to stick the film on the phone?Immediately it is worth saying that different firms use different technologies. If you plan to re-paste the film several times or are afraid that the first time you can not cope with the task, then choose accessories, say, Brando.

They are based on a very thin base of silicone. Thanks to him, there will be no sticky marks on the display.

Как наклеить пленку на телефон, если раньше вам never had to do anything like that? In fact, everything is quite simple. First, remove the traces of contamination from the screen with a cotton swab dampened with alcohol. This will allow the film to adhere firmly to the substrate. If you did not buy branded cover, and bought a universal version, which is suitable for most smartphones, then it must be cut. Remember that the edges of the protective layer should not reach the "edges" of the display a little. Otherwise, the question of how to stick a film on the phone will become regular for you.

Also need to make a cutout for the speaker or the function button at the bottom of the screen. When the film is already pasted, such a procedure will be much more difficult.

Carefully dispose of all the bubbles.These are weak points in protecting your phone. They are the first to not withstand the pressure of mechanical action. And the color rendition due to them will be very lame. If you do not know how to stick the film on the phone correctly, then be sure to use the following advice. Begin to press the coating to the surface of the screen exactly on the side where the cutout is located. If not, paste from the top edge.

Are interested in how to paste a carbon film onphone? To do this is not much more difficult than in the case with the usual option. The procedure is, in principle, identical to that described above. That's only necessary to do it with even more accuracy. Carbon film has the property of adhering very firmly. Therefore, it will be difficult to repeat the procedure. In extreme cases, you can always ask for help from the seller in the store where you purchased protective cover for your smartphone. This will avoid damage to the film.