Every user of a modern smartphonewants the gadget to work for a long time and not lose its appearance. To preserve the smoothness of the screen, the phones are covered with a protective film, but it is not eternal either, so sooner or later it will require replacement, but not everyone knows how to stick a film without bubbles on the phone. So that the result does not upset you and there were no errors in the process of sticking film, you need to know a few very important nuances.
What is the film for?
First you need to figure out whatneed this film. Over time, any screen is covered with a layer of dust, small scratches, is erased, fingerprints appear, and the like. As a result, the phone becomes untidy, decreases contrast and brightness, decreases the sensitivity of the screen and the quality of color reproduction. Protective transparent film completely covers the screen of the tablet or smartphone, while the quality of work and the image does not change. Today it is the best protection against dirt and scratches, thanks to it also harmful UV light is not let through, the screen becomes more readable in bright sunshine, and there is no glare, but you need to know how to stick the film without bubbles on the phone.
What will be required
First of all you need to choose a room whereleast of all dust, it can even be a bathroom. For better effect, turn on the hot water so that the steam will precipitate dust more quickly. Also bring along a regular plastic credit card, cloth and lint-free wipes. Some smartphone users advise a terry towel. Now you can stick the protective film on the phone, especially without fear that in the process of work the dust will settle on the screen. And from this point you can safely move on to the next stage.
General recommendations
Начинать процесс наклеивания пленки сразу нельзя.First you need to prepare and stock up the above materials. Having figured out where to stick the film on the phone, you need to remember a few important tips. Wet wipes wipe the surface of the screen, as a result there may be some stains, but do not allow stains. After that, the phone is wiped with a towel, but it is better to use a cloth that is often sold with a protective film. It is strictly forbidden to use alcohol-containing substances or cleaning products. You also can not spit, breathe or blow on the screen - only a lint-free cloth and wet wipes.
Instructions
With this simple instruction, you will learn how to stick a film without bubbles on the phone:
- Prepare materials, film, workplace and wash your hands. Put a clean sheet, install a good lighting.
- Red sticker or number 1 marked the first layer of the film, which must be removed. The film is gradually applied to the phone from top to bottom.
- The main stage in which you need to thoroughly cleanscreen even from the smallest particles, because of which bubbles appear. For this purpose, a silk cloth is used, which is sold with a film. You can not for this use towels with small pile or cotton pads.
- Stick the film, do not touch the sticky side with your fingers. Do everything slowly, the fixed part smoothly smooth from the center to the edges. The film should not go beyond the screen.
- After sticking, all irregularities can be smoothed with your fingers or a card from the center to the sides, if necessary.
- Number 2 or blue sticker marked the second layer, which must be removed at the end of the work. You can remove it immediately, but if you have little experience, then do not rush.
Now you know how to stick a bubble-free film on the phone. But there are still some tips that will help you in this difficult issue and make the work as simple, quick and correct as possible.
Types and types of films
Need to understand what to stickThe film on the phone from the first time is quite difficult, especially to make it so that there are no bubbles. It is not easy to figure out which one is better to choose. Naturally, you can stick a universal film on the phone, but it does not always meet the requirements of users. It is better to choose a particular one, but it can be of four types:
- Matte - without any problems, allows you to view texts, as well as video, including in very strong solar or artificial light.
- Glossy - the phone gets extra beauty, the look is greatly improved. But in bright sunshine or strong illumination appear glare.
- Mirror - made from special glass,The phone has an extra shine and chic. The disadvantages are similar to glossy films. There are models for the back cover of the phone, which replace the cover, closing the smartphone on both sides.
- Capable of clean peeling off - quality separates, leaves no glue. It has a very thin layer of silicone, adheres perfectly to the screen, leaves no residue, you can glue it many times.
Film features
How to stick a film without bubbles on the phone -far from the main question. We must also pick up the film itself, and it is better to buy exactly the one made specifically for your phone model. Basically its size is slightly smaller than the parameters of the screen - by 0.1-0.5 mm. This is done so that the edges of the film do not cling and do not lag behind the surface. If the film does not lag behind, then the garbage will not be able to fall under it, and the screen will remain clean, whole and without scratches.
В том случае, если вы приобрели большой лист film, the size of which must be customized manually for a particular model, then you need to figure out how to cut the film on the phone correctly. It happens that the first time something does not work - you should not be upset, you just need to practice a little. If the film is stuck crooked, remove it, but do not hook. Wash, dry it and start working again. Some masters, on the contrary, advise to pre-wet the film, shake it, and only then begin to glue, squeezing out water from under it.
