Korean company "Mikatsu" many peopleknown for its boat motors. If we consider specifically the four-stroke models, they differ in high performance. The height of the transom of such models on average is 420 mm. Total pushers used in the design of no more than three. If we talk about the features, we can distinguish the presence of retainers.
Additionally, manufacturers make four-strokeengines with a fairly high-quality fuel system. However, there are also drawbacks to such modifications. To understand this issue in more detail, it is best to consider the most popular models, and in parallel with the characteristics, find out real consumer reviews.
Review of the model "Mikatsu M3" (9.9 hp)
This boat motor "Mikatsu" (9.9) has good reviews. Many buyers prefer this model for its performance. The engine overheats in this case very slowly. However, it should be borne in mind that his fuel consumption is quite large. The vertical shaft at the presented instance is installed with a diameter of 13 mm. Also note that the rear gears are made from a special aluminum alloy.
If you believe consumer reviews, it is erasedthey are slow. The drive shaft of this boat motor is securely fixed. The skeg is installed under the propeller tray. Special attention in the presented model deserves a high-quality cooling system. In total at this model the manufacturer provided six intakes. According to the owners, they can be cleaned without any extra effort. Today this boat motor costs about 152 thousand rubles.
Reviews of the motor "Mikatsu M2" (3.5 hp)
This boat motor "Mikatsu" (3.5) reviews deserve positive. This model is primarily interesting due to the use of high-frequency gearbox. The engine in this case is installed on a strong pallet. Its thickness is equal to as much as 12 mm. The driving gear in the presented instance is fixed on the central shaft. According to consumers, it does not need frequent lubrication. It should also be noted that removing the gearbox is quite simple. Thus, if necessary, it can be easily inspected. More reviews about boat engines "Miqso" (3.5 hp) are associated with high-quality tiller.
Among the shortcomings, it is important to mention the low frequencycentral stock. In a minute, he is able to make a maximum of about 3,100 rpm. At this time, similar modifications of this parameter are at 4300 rpm. This happened due to the fact that the central shaft in the presented configuration is set quite massive. It can withstand large loads, but its parameters are small. Cost in our time, this boat motor to the buyer for about 130 thousand rubles.
Features of the modification "Mikatsu M5"
Mentioned outboard motors "Hyundai Miksu" reviewsoften get for high-quality water pump. Thus, pumping occurs very quickly. The impeller of the specimen is set quadrangular. The front gear at the engine is mounted on a special sleeve. If you believe consumer reviews, it is erased very slowly. Also, the owners praise this model for a rather voluminous anti-cavitation plate. It is fixed in this case over the propeller shaft. The gearbox is protected by a special casing. This model is worth about 140 thousand rubles in the store.
Consumer reviews of "Mikatsu M9"
Reviews of boat motors "Mikatsu" (5 hp.a) there are a wide variety. Some choose this model because of high-quality deadwood. It is installed in this case on a large pallet. In this case, the clamp in the presented model is available. The carburetor deserves special attention in the outboard motor. There are three valves in total. The ultimate pressure they can withstand great. It should also be noted that, if necessary, it is removed without problems. In this case, the rocker is located at the top of the motor.
According to consumers, inmaintenance is pretty simple. Anti-cavitation plate in this model is available. It is installed above the anode and does not touch the reverse gear. According to buyers, this model is very economical in fuel consumption. During the hour of operation of the motor consumes no more than 1.3 liters of gasoline. This motor is currently about 146 thousand rubles.
What they say about "Mikatsu M15"?
This four-stroke outboard motor "Miksu" (5 lc) has a wide variety of reviews. The presented configuration in our time is in demand because of the quality gear. It is installed as standard in a protective casing and is not afraid of high humidity. The central rod in this case has a diameter of exactly 120 mm. The reverse gear on this outboard motor is located near the anode.
Due to this, if necessary, it can be easilydisconnect. Valve wear in the presented unit is very small. In general, the carburetor is installed quality and breaks quite rarely. However, these boat engines Mikatsu have negative reviews. Of the minuses, consumers note mainly the lack of retainer reversing. Thus, to cope with a boat motor is sometimes difficult. It will cost in the store the buyer for 155 thousand rubles.
New modification "Mikatsu M18"
This boat four-stroke engine "Mikatsu"Reviews often receive due to the high quality deadwood. Also, the new model among other devices is distinguished by the presence of a new generation gearbox. According to consumer reviews, it fails quite rarely. In this case, the vertical shaft at the outboard motor is made of a special aluminum alloy. The reverse gear wheel of this model is capable of withstanding large loads.
It should also be noted that the impellerthe presented unit is installed cast. The anode in this outboard motor is located above the anti-cavitation plate. Deadwood is set to standard and is very easy to set up. According to consumers, the fuel consumption of the presented unit is insignificant. According to the documentation, an average of about 1.3 liters of gasoline is spent per hour of use. It is worth this boat motor today about 120 thousand rubles.
Opinion about the model "Mikatsu M20"
These boat engines "Mikatsu" reviews havepositive and primarily distinguished by their deadwood. It is installed in the presented model of automatic type. All this suggests that it can be configured quite simply. In this case, the central stock is removed without any extra effort. In this case, you can detach the crankshaft independently.
Additionally, it should be noted that thisconfiguration has a high-quality fuel system. The valves in this case are installed copper, and they are located above the carburetor in a horizontal order. Due to this, their purging occurs more qualitatively. This motor is worth about 160 thousand rubles in the store.
Reviews about "Mikatsu M30"
These boat engines "Mikatsu" reviews have the mostvaried, but many buyers choose this model for ease of management. In this case, the tiller is fixed quite firmly. Also note that it has an extensive rubber gasket. Thus, to adjust the position of deadwood is not difficult, even for a beginner. Special attention in the presented unit deserves the fuel system. In this case, the valves are able to withstand pressure not more than 5 bar. The reversing gear of this model is installed directly above the plate. If necessary, it is removed very quickly. It should also be noted that the Mikatsu outboard motors deserve good feedback because of the high-quality retainer.
Еще в модели имеется специальная рессора, которая holds the vertical shaft. The propeller of the presented copy of the manufacturer provides a plastic. The water pump of this outboard motor is located above the impeller. If you believe customer reviews, the gearbox breaks only if it is not properly lubricated. Today this configuration is about 180 thousand rubles.
