Today we will discuss how to fix the failure of the ISDone.dll component. “An error occurred while unpacking” - a message of this type occurs quite often among users of the Windows 8 and 7 operating systems.
Antivirus
Element path
Fraud
Fault code and its types
Verification on a third-party personal computer
We move the used file to an outsidercomputer. We use for this purpose a USB flash drive or a local network. If the file is working properly after the transfer, then the problem lies in the first computer. Note that there are several reasons for this situation, but the main ones are memory and system problems.
In case a similar error appears onanother computer, download the file in question directly from a previously used source on the Internet. Unpack or install the item. So, if the error is repeated during the transfer, download the file to a new PC, but from a previous source, and deploy it there. In the event that these actions lead to stable operation of the package on the second computer, most likely, the first does not have enough RAM to play the item.
To solve the problem, you need to doreplacing the hardware of the PC, namely, you should install a more modern RAM module. It should be noted that the “ISDone.dll crash itself - an error occurred during unpacking” is most often caused by problems with the hardware; problems directly in the Windows operating system rarely lead to this result.
In case the above methods do notworked, download the file from an alternative source. We can also use an application called Universal Unpacker. In the original - Universal Extractor. This is a free program. With this solution, in some cases, it is possible to unpack the installed archives, which the system seems damaged.
RAM
If it is determined that the cause of the failure is “ISDone.dll file is corrupted "is the RAM, disable the corresponding modules one by one. Run the processed file after removing each of the memory elements. PC parsing operations should be performed only in the off state. This operation is strongly recommended to entrust experts. Such an approach requires time-consuming, extreme caution and professionalism, but in some cases it can be effective. As a result, the file can earn. However, it is better to purchase new memory modules if there is such an opportunity.
Management
1. Disable anti-virus protection.
2. Pay attention to the clarification following the word ERROR.
3. Download the package again or from another source.
4. Update the used archiver to the latest version.
5. We apply the licensed version of the software.
6. Install RAR.
7. Install 7-zip.
8. Rename in Latin letters all the folders that are in the path to the application.
9. Increase the size of the paging file.
10. Reinstall the operating system.
11. Change the memory modules.
If you encounter the error described above,Remember that, despite the fact that it refers to archive damage, in 99 percent of cases it is fine. In this case, the establishment of the causes of errors in its code is ineffective. If the description of the failure contains the following: “failed CRC Check”, this may indicate actual damage to the archive. If the error note says: “Decompression failed”, the reason is in the PC in use. How to be in this situation - we have already discussed above.
In step 9 of the instructions, the swap file was mentioned.To work with him go to the properties of the system. Open the "Advanced" section. Use the function "Parameters". In the new window again go to the tab "Advanced". Further, in the “Virtual Memory” section, we use the “Change” function. Uncheck automatic paging file volume detection. Specify the local disk for its placement. We use any volume, except for the system, where there is a lot of free space. Specify the maximum value equal to the size of the RAM, and press the "Set" button. Save the parameters.