The article will consider two methods for writing a disk image to a flash card: using the convenient UltraISO program and the command line. So, how to burn an image on a USB flash drive?
How to burn an image to a USB flash drive using UltraISO
Before proceeding with the installation of the OS,Determine the type of media that will be used for this. Recently, this issue seems very important to most people, as more and more compact netbooks that are not equipped with an optical drive, and large-capacity flash drives for many users are becoming an increasingly convenient tool for work. They are able to cope with the tasks of the boot disk with the OS. In general, installing a system in this way is a faster, but also a more complex option.
After getting into the hands of the disk image with OSthe question arises, but how to write an image on a USB flash drive or another medium? First, you must install the UltraISO program. After installation, you can start the application. Before you start any manipulation, you should insert a USB flash drive on the port to which you want to record. Open the disk image with the specified program, and then move to "Boot" - Write Disk Image. In a special field, you must select the media name, because they can be connected to several. As a recording method, you must select USB-HDD.
Now that everything is checked, you can click on "Record". At the end of the program, the program will notify you about it, and the flash drive will be ready.
How to burn an image to a USB flash drive using the command line
In this case, to prepare the image isconnect the USB flash drive to the port. After that, you can call the command line. You can do this in many ways-the user chooses. In the command window, type the special diskpart command. This command starts the system utility for managing disks. This will clear the contents of the flash drive, create a partition that will become active, formatted, and then be ready to burn the image. After that, the bootloader files will be placed on the disk, which will make the installation disk capable of being detected as a removable drive, and this will allow installing the operating system from it. It is worthwhile to consider all these actions in more detail, so that it became clear how to burn the image of the disk on the USB flash drive. After loading the diskpart system utility, the DISKPART> prompt appears before you. The list disk command allows you to see the list of disks of this computer. After selecting the select disc command with the number, which is the serial number of the disk that is the flash drive, you can select this disk to implement on it all other commands needed when working with diskpart. It's worth to be careful when entering parameters, because you can make a mistake with the hard drive, which will cause data loss, because it leads to formatting. The clean command allows you to delete all information and partitions from the USB flash drive. The create partition primary command creates a new partition on the drive. Using the select partition 1 command, we select this disk for further manipulations. The active command makes it active. You can format the disk using format fs = NTFS. Using the assign command, we initiate a disk connection, which opens the autorun window, and you can exit the utility with exit. Now it remains only to write the image on the USB flash drive, for this you need to copy the bootloader to it.
After preparing the flash drive on the media, copy the files from the image. After restarting the system, you will see that the installation process is downloaded from the USB flash drive.
That's all, as for the question, how to write downimage on the USB flash drive. In this there is nothing complicated, the main thing is to keep to the specified sequence of actions and to be as attentive as possible. The convenience of using a bootable USB flash drive will be appreciated by you.
