Now generations of computers are changing at an incredible speed: technical solutions, which were predicted yesterday by a bright future, are now on the sidelines of progress, safely forgotten by everyone.
Now you can find information about this veryit is easy, but how to install WiFi at home is often silent. Apparently, automatic configuration is considered to reduce the need for user intervention to a minimum. In part, it is. On the other hand, not knowing how to install WiFi at home, it is possible to face a number of problems. Nuances are always important. Especially if you need to choose a router for the house.
Global Network Access
Options
There are several options for accessing the Web from multiple computers:
- machine number 1 (with the Internet) is connected to the seconda twisted pair and shared access to it. The disadvantage is that you need two network cards, and even when you turn off No. 1, you cannot open the pages on No. 2;
cable provider connects to the switch, whereThere are also “tails” of Ethernet interfaces from both machines. However, this solution does not always work, as many providers allow access only from the host computer, checking the MAC address of the network card; - choose the best router for your home and organize independent access from various devices.
How to install WiFi at home
A router is a packet management device.data. It can communicate with computers via twisted pair or radio waves (WiFi). The second allows not only to abandon the wires in the house, but also to provide access from all mobile devices within a radius of several hundred meters (on the passport), which is very convenient.
So, how to install WiFi at home?First of all, you need to make sure that all devices that need to provide access to the network have a WiFi radio module. In modern laptops and mobile phones, it is present, but for a personal computer will have to purchase an expansion card. Then you need to decide whether to share the popular IPTV solution. If yes, then Dual PPPoe and Multicast items should be present in the WAN settings of the router. When linking the provider to the MAC address in the settings of the router, there should be a MAC clone function. It makes no sense to recommend any manufacturer company - this is a personal choice of the user. Also pay attention to the support of standards IEEE - they must be the same or be compatible. The type of radio module used can be obtained from the passport to the device or on the manufacturer's website.
Connectivity
So, the WiFi router is purchased.Twisted pair from the provider connects to the WAN connector. All other machines turn on the radio modules (you need to install the driver and use the device). After that, you may need to open the configuration window (usually the network itself appears) on each computer and confirm the use of the detected access point. That's all. If the router has DHCP enabled (most often this is the case), then you can begin to review the Internet resources. If problems arise, then you need to use the auto-install disk that comes with the router.