How to make gypsum board ceilings with your own hands? Not so difficult

If you built or repaired a house, but younot succeeded ceilings, then do not despair. Uneven surface and other flaws can be corrected independently, rather than hiring specialists. Drywall will help you in this. With it you can hide any flaws on the main surface. This article will talk about how to make ceilings of plasterboard with their own hands. Installation in this situation will not take very long time. It is also possible to decorate the ceiling with any materials.

There are many kinds of ceilings from plasterboard.If you decide to find an answer to the question about how to make plasterboard ceilings with your own hands, you should determine the shape of the future design. You can choose for yourself some option to your taste, while relying on the recommendations of friends or on articles in magazines or building literature. And you can fantasize yourself. Ceilings from gipsokartona are one-level, multi-level, geometric, stepped and wavy.
The appearance of the ceiling from gypsum board can depend on the choice of lamps, a variety of decorative elements or from wooden beams.

How to make gypsum board ceilings with your own hands?Installation is a painstaking business, but not at all difficult. Here is an example of the simplest installation of a ceiling made of plasterboard. Where to begin? First, you need to think over the details themselves: where the lamps will be built in, calculate the height and select the elements for its decor. You need to identify all the flaws in the ceiling that you need to hide. Prepare the necessary tools before work: level, tape measure, screwdriver, crown for holes, drill, plane, construction knife, sandpaper and spatula. To work, you will also need a guiding and ceiling profile, a straight suspension, screws and dowels, a crab. The dowels can be replaced by anchor wedges during the fastening process.

Answering the question about how to make ceilings fromgypsum board with your own hands, you should create a marking with the help of guides from profiles. It is to them will be attached material. It should be noted that they should not be placed too far apart. Otherwise, the drywall will hang. Fixing sheets with a small gap. It will be pressed into a special mixture, which is used to seal seams. At the very middle of the sheet and its edges will be the main profiles. Suspensions are fixed with a pitch of 400 mm on metal anchors along these lines. Then the carrier profiles are inserted into the starting frame or in the guides themselves. They are fixed in the room along the entire perimeter. The frame is inserted so that there is a small distance between it and the wall. The gap is necessary so that there will be no consequences from the deformation of the ceiling. And changes should be expected from the temperature differences. Then the guides are inserted into the hangers.

The final stage of work is priming andputty. Even if you decided to make two-level ceilings from gypsum board, photos of which you can see, this step should be carried out necessarily. The intermediate stage in creating a ceiling of high quality is puttying. Apply to puttying roller with a handle, putty knives, a wide brush, sandpaper, cross screwdriver, universal primer, finishing putty, serpian. After the primer, which is carried out in two stages, you need to go to the finish of the ceiling. In this case everything will depend on your imagination. You can use wallpaper for the cladding, but you can apply some image to the ceiling. The choice is yours.

On this, the construction of the ceiling can be consideredfinished. If the suspended ceilings you do not like, then you can turn your attention to the stretch ceiling. In the bedroom and other rooms, it will look just amazing.