Recently, an increasing number of ourcompatriots trying to design their own houses in the old style. Architectural elements characteristic of such areas as Gothic, Baroque, Empire, and Classicism are especially popular. After reading today's article, you will find out what are the concrete balusters.
The advantages of these structures
Это небольшие архитектурные колонны, used for decorating buildings. It is these elements that give the interior a complete aristocratic look and highlight the wonderful taste of the host. It should be noted that concrete balusters perform several functions at once.
They have long ceased to be easy.barrier element. Modern designers successfully apply them to update the architecture. The popularity of these structures is explained by the fact that they are endowed with a number of major advantages. The main advantages of concrete balusters include environmental safety, water resistance, long service life and cold resistance. Products from this material are favorably distinguished by increased durability and reasonable price. No less important is the fact that a well-polished glossy surface is almost as good as natural marble in terms of aesthetic qualities.
Forms for the production of structures
To make concrete balusters, first castspecial disk. It is important that its diameter is five centimeters greater than the cross section of the plaster model. After that, it is glued to the end of the workpiece and mark on it the points under the lobes, from which the form shell will be formed. Subsequently, in these places drill holes required for assembly.
The resulting construction is divided in half andconsistently collect the first row, not forgetting to handle every detail of the release grease. Between the model and the educated board, gently pour the gypsum solution. After it hardens, begin disassembling the structure and trimming the edges. On the top of the drilled holes for pieces of the second row. All elements are varnished and reassembled, rebuilding the rim for the next sector. They are still smeared and filled with plaster solution. Sectors made in this way are stapled together.
Casting
The peculiarity of this process isusing almost dry solution. Sand, cement and aggregate are necessary for its preparation. All these components are combined in the right proportions, evenly filled with water and mix well. The readiness of the solution can be checked by squeezing it in your hand. If, after opening the palm, it does not disintegrate, then it is suitable for further use.
The solution obtained in this way is graduallyfall asleep in the prepared form and carefully stamped. It is important to ensure that the thickness of the layer ranged from five to ten centimeters. Gradually, the form is filled to the brim. After a little time, carefully remove the casing and wait until the concrete balusters are completely dry. After about two days you can begin the installation.
Installation of balusters
For mounting these elements in the bottom and topparts of the form should be provided with special metal inserts. In some cases, for these purposes thin reinforcement is used, which passes through the entire rack. When mounting balustrades on metal steps, this tab is simply welded to the march.
It should be noted that this design of the ladder is much more reliable and stronger than those for mounting of which the balusters are mounted on dowels or anchors.
