Using a profile for gypsum board when installing walls

Often when the apartment is redesigned,need to transfer the interior walls. More recently, only the need for such repairs could plunge a person into horror, since only a brick or foam block was used to build the walls.

But the construction industry is constantly in development, so now we have the opportunity to manage cheaper and easier to use materials.

К примеру, можно взять гипсокартон и немного profile for drywall. It is light, cheap, and the walls of this material can be built in just a few hours of not too hard work. The walls will be not only built in the shortest possible time, but will be perfectly straight. That is why during the redevelopment of an apartment or house it is best to pay attention to the drywall. The second argument in favor of such a choice is the flexibility of the material itself: using different types of profiles for drywall, you can create designer compositions of almost any kind. In short, if you know how to handle tools, then you can get to work.

To begin with, simply measure the room to receiveaccurate data on the amount of material you need, buy the plasterboard, self-tapping screws, the stock of the profile for gypsum board and the tools that you do not have. Greed is not necessary: ​​materials and consumables are better to take 10% more than required by calculations.

First of all, it is necessary to mount a stablethe frame on which your whole wall will be erected. Carefully fasten the profiles on the floor and ceiling. It is to this stage of the work should be taken as responsibly as possible, since poor attachment will inevitably lead to great problems with time. First, fix the vertical posts to which the crossbars are attached. The step between them must exactly match the size of the sheets of material.

It often happens that instead of normalA metal profile for gypsum cardboard is used ordinary wood. It is not advisable to save money in this way: in conditions of high or low humidity, the tree can easily change its configuration and "go", which will lead to the expected results. It is better to save on the fact that you will do all the work yourself, without causing costly hired specialists for this.

Suppose you are finished with the frame.With the help of screws begin to attach material. Once again we remind you that the profile for drywall, the dimensions of which are chosen strictly individually, should be as securely as possible. Initially, attach only one side. All communications, cables and other equipment are laid in the interstitial space, which would otherwise spoil the view. Then in the "sandwich" send soundproofing materials and, if necessary, thermal insulation.

After that you can start the finishing work.The joints between the sheets of material must be carefully glued with tape, and only then primed and glued wallpaper. By the way, if you are going to glue them, you should seal up the smallest surface defects.

As you can see, using a drywall profile can make life easier during repairs.