The toy "Lizun" was and remains popularThe occupation for children, which carries them for a long time. The hero of the well-known cartoon became so fond of the guys that in 1976 a toy was produced that takes not only toddlers but also their parents. However, lizuna has such a shortage as fragility, so every time you have to buy a new product.
To save time and money,The inventive parents found a way out of the situation and learned how to make a lizuna at home. In addition, in this case, you can be completely confident that the toy is safe for the baby's health, and older children can take part in the production.
On how to make a lisuna from toothpaste and other ingredients, you'll find out below. The process does not take much time, but, of course, it will be fascinating.
Toy from toothpaste without glue
To make the lizard it will be necessary:
- Tube of toothpaste.
- Dye for food.
The manufacturing process is pretty simple:
- It is necessary to take a glass and survive in it the right amount of paste. To form a lime it is recommended to take a thick or gel paste.
- Add the food coloring to the mixture. The more it is, the more saturated the color will be.
- Mix thoroughly until a uniform color is obtained and the color of the dye is dissolved.
- Put the container with the finished mixture on a water bath and support 14-15 minutes. This is necessary in order to evaporate excess moisture and the mass became even denser.
- Lizun is ready.
If the result is too dry,smear your hands with any oil and rinse it. The size of the lizard depends on the amount of toothpaste used. Now you know how to make a safe lisun from toothpaste without glue, which, of course, will be appreciated by the kids.
Lizun from glue and sodium tetraborate
For a toy you will need:
- Fresh glue PVA.
- Tetraborate sodium (sold at the pharmacy).
- Dye.
- Splashes (optional).
Manufacturing process:
- Pour the glue into a pre-prepared container.
- Add the same dye and sparkles (if it is provided).
- Stir thoroughly.
- Add sodium tetraborate.
- Mix all the ingredients and mix the mass.
- The toy is ready.
Lizun from toothpaste and soap
To make a lisuna from toothpaste and soap, you will need:
- Toothpaste.
- The soap is liquid.
- The dye is dry (if desired).
- Flour.
Manufacturing process:
- Mix 20 grams of toothpaste and soap.
- If a dye is used, it must be mixed with flour.
- Continuously stirring, gradually add flour (5 teaspoons). After all the flour is poured, knead the dough.
- Add quite a bit of water and continue kneading the mass until it is viscous.
Toy of flour without glue
Now you understand how to make a lime from toothpaste, but there are other variations, for example, for making a flour product you will need:
- The dye is grocery.
- Colors acrylic.
- Ink (can be taken from the marker).
- Wheat flour.
- The Vodicka.
Manufacture:
- Pour a glass of flour into the container.
- Fill it with the same amount of water. Mixture in density should be like sour cream, if it is thicker, then pour a little water.
- The resulting mass is divided into three parts.
- In the first part, add the dye, mix thoroughly and send for 1 minute in a microwave oven (medium power). After that, get it and cool it. Lizun ready!
- In the second, pour acrylic paint, mix and pour into a heated frying pan. The mixture must be stirred constantly until it thickens. The toy is ready!
- Add ink to the last, pour it into molds and send it to the oven for 5 minutes at a temperature of 160 degrees. Done!
All three methods are good, but such a toy only once. While it is warm, the material is flexible and stretches well, but after cooling it hardens.
How to make a lime shampoo
Lizun from toothpaste and shampoo is the most affordable product, as these funds are in every home.
Preparation:
- Take shampoo and liquid soap (preferably, their colors are the same) and mix them in a ratio of 1: 1.
- Cover the mixture with a lid and clean it for a day in the refrigerator.
- The toy is ready.
This product requires special care. It should be stored in the refrigerator, guarded from ingress of debris and dust, then the lime will last about a month.
Lizun from dish washing and hand cream
The toy, made in this way, turns out jelly-like.
Ingredients:
- Detergent (for example, Fairy).
- Soda.
- Hand cream.
- Dye for food.
- Plastic cup.
- Wand (to stir).
Manufacturing process:
- In a glass, pour a tablespoon of dishwashing liquid.
- Pour baking soda (half a teaspoon).
- Stir thoroughly.
- Add one and a half tablespoons of hand cream and mix.
- The next step is to mix the dye until it is completely dissolved (color and quantity are selected by eye, the more the dye, the more intense the color).
- Ready mixture pour into a bag and put into the refrigerator for 4-5 hours.
As a result, a good gelatinous lyzun is obtained. If the mixture, in your opinion, is too liquid or vice versa, you should add / reduce the amount of hand cream.
We reviewed the most simple and popularrecipes, but, of course, not all. Variants of mixing different ingredients are many, for example, a tooth-paste and starch lisun, with the addition of hydrogen peroxide and the like. Houses can be made as completely harmless toys from organic products, and with the addition of more complex elements. The main thing - remember that you can not store these products for a long time, the average shelf life is a week.
Now you know how to make a denture from a dentalpasta and other improvised materials. All of the above methods are very affordable and easy for making toys at home with children. And the resulting toy will certainly please not only kids, but also parents who gladly remember the lick in their hands.
