If you are looking for a popular surface pump,which today is claimed by summer residents, then it is possible to prefer "Agidel". Even if there is a central water supply in the private territory, the owners of houses quite often prefer to have equipment on hand that allows watering the beds not from a tap, but from the nearest well. With this device it will be possible to use rainwater for irrigation of crops, which is collected during the period of precipitation in the tank.
After reading the article you may be interested.model "Agidel". This type of pump, according to users, is ready to last for a long period of time. Before purchasing it is necessary to find out under what conditions this device can be operated.
Main technical characteristics
The described model refers to the surfaceVarieties of centrifugal pumps that pump out water without immersion in liquid. The device will need to be installed near the source, having lowered into the water only pipes or suction hoses. This will ensure a high level of security, since the contact of the electrical wires with the liquid will be completely excluded.
Features of the model "Agidel-M"
If you are interested in the model "Agidel", the pumpYou can purchase this type for an affordable price. The above-mentioned variety is small in size, and also very economical energy consumption. Thus, the device weighs only 6 kilograms, and consumption is 370 watts. This equipment is designed for pumping cold water, its temperature should not be more than 40 degrees. You can use this device to pump water from a depth that reaches 7 meters. At the same time, the equipment can work for a long time without stopping, which is ensured by protection against overheating.
If the unit is equipped with an ejector, thenit can easily be used in wells, where the water mirror is located at a depth of 15 meters. If you are considering the “Agidel” model, this type of pump can be used to pump exclusively pure water from pools, wells, artificial reservoirs and boreholes. If you plan to pump water from a reservoir or pool, then you need to ensure that from the inlet valve to the bottom was more than 0.35 meters. The most impressive water pressure is 20 meters.
Characteristics of the pump brand "Agidel-10"
This equipment is different from the above.models in that it is more powerful. This unit consumes in the process of 500 watts, but it can provide a more impressive water pressure, which is 30 meters. Such a device weighs 9 kilograms and acts as a self-priming pump. The equipment does not imply the need to fill with water when starting the system.
If you decide to choose "Agidel", the pump of thisThe brand is very reliable, as users have noted. It can be used for water supply in residential buildings. This is due to the fact that the equipment has a high capacity and delivers liquid at once to several points with a normal set. Thus, at the same time water can flow both to the kitchen and to the bathroom.
User's manual
Pump "Agidel", the characteristics of which youIt will be useful to know before visiting the store, should be installed exclusively on a flat and solid surface. From this circumstance will depend on the quality of work in the process of use. It is important to take care of protection from direct ultraviolet radiation, as well as precipitation. Experts recommend to arrange special containers or install equipment inside the utility room. The first method is more preferable, because due to the long hoses and pipes, the water pressure prescribed in the instructions will be reduced.
Recommendation of the master
Pump "Agidel", the characteristics of which are describedThe article is not intended for use in the winter, but if there is no other option for water supply, then it is necessary to find a room in which the temperature will not fall below zero. However, you can use an alternative method that involves digging a hole. It must be placed below the level of soil freezing, concreted, and then insulated by placing equipment there.
Additional recommendations for use
Water pump "Agidel" can be installedinside the well itself. This is exactly what some holiday-makers do. To do this, you will need to build a strong raft of materials that do not interact with the liquid. This approach allows to artificially increase the height of the suction, but suggests the need for a connection to the extension cord. This requirement is due to the fact that the length of the cord will be insufficient to reach the outlet.
Fill before launch
It is necessary to take into account that the connectionpump brand "Agidel-M" involves pre-filling with water. This requirement is explained by the fact that the operation of the dry can cause damage to the entire mechanism. It is important to consider the technology with which you can fill the system with water in the country through a manual column. Pumps "Agidel", the technical characteristics of which allow to carry out installation work correctly, must be poured before starting operation. To do this, open the valve, and then lower the hose from the equipment into a container with liquid.
How to troubleshoot problems with pump operation
The set comes instruction.The pump "Agidel" will work properly if you follow the rules prescribed by the manufacturer. If you notice that the water supply is very weak, the reason for this may be the use of the wrong hose for water intake. If water is sucked from a well with a rubber device, then thin air may form, which results in a contraction of the walls. This may interfere with the normal flow of fluid. Experts recommend using a hose that is reinforced with a plastic spiral.
To replace, you will need to unscrew the 3 bolts, whichlocated on the body. The master must remove the casing and unscrew the 4 bolts that are located in the engine. Next, you can remove the motor housing, disconnect the snail and unscrew the bolts. The master will need to remove the gasket and unscrew the nut holding the impeller. Then the anchor is removed, which can be helped with a hammer blow. After he left the casing, in the impeller you need to find the glands. They are removed so as not to damage the insert between them. At the final stage, you need to install new oil seals, which are separated by an insert. Assemble the pump yourself in reverse order.
Conclusion
The described pumps brand "Agidel" arereliable and high-quality equipment. In order to ensure long-term operation and the possibility of stable pumping of water in any period of the year, you need to use the device in accordance with the instructions. However, in addition, you will need to lubricate and clean the individual parts.
