The concept of "smart home" is increasingly applied tohousing, in which the main emphasis is on the use of an abundance of high-tech devices that can improve the comfort of living. One of the main systems that needs automation is lighting. The most important element here is a remote light switch with a remote control.
Principle of operation
Каждый дистанционный выключатель света с пультом has its own unique address. In other words, the individual signal transceivers only work on commands sent from a control stored in memory.
Functionality
Modern electronics is able to manageindividual chandelier segments. Such an opportunity becomes useful, for example, when it is necessary to dim the light when going to sleep or when there is a need to create too bright light.
Remote light switch with remote controlable to weaken or enhance the brightness level of all light sources that are connected to the chandelier electrical circuit. That is, the user gets the opportunity at any time to change the saturation of the lighting in the room at will.
What other possibilities besides closure andDoes the lighting circuit have a wireless remote control? A light switch with a built-in dimmer allows you to memorize various settings, which contributes to the creation of a particular atmosphere in the room at the touch of a button.
To save the user from having tosearch for a lost console; most devices install light and sound alarm devices, which can be activated by contact with a wall-mounted radio signal transmitter.
Characteristics
- power - about 10 mW;
- frequency - from 430 to 870 MHz;
- range of operation - in the range from 30 to 500 m;
- switching power - from 200 W to 5 kW.
When choosing the right product forRemote control of lighting parameters is extremely important to pay attention to the power ratio of the transmitter and receiver signal. The performance and responsiveness of the system depends on this characteristic.
Benefits
- There is a possibility of combining all the lighting elements into a single system.
- When connecting, there is no need to install additional wiring.
- The overall comfort of controlling light sources, in particular for people with disabilities, is increasing.
- Installation does not present special difficulties.
- If necessary, you can upgrade the installed system.
- Safety of operation of lighting devices in the room increases.
disadvantages
Along with the obvious advantages, the use of remote control has some drawbacks. First of all, it is worth noting the relatively high cost of most functional systems.
Using a remote light switch withremote control, will have to put up with the limited possibilities of its use inside the house. In the end, the radio signals emanating from the console negatively affect the functioning of the communication lines that are close to the object.
Control using a smartphone
Can be downloaded to mobile phonespecial applications. Thus, relying on an ordinary smartphone, the user is able not only to turn off and on the lights, but also to regulate the intensity of individual light sources. Usually, commands are transmitted by sending a signal to the radio in the form of coded text messages.
Connectivity
The bulk of the means of remote controllighting work with LED and energy-saving lamps. The connection here has its own nuances. To ensure safe, correct operation of the system, you will need to organize good nutrition. A mandatory requirement is the presence of a phase and zero. Such remote switches are mounted in close proximity to the light source.
The most powerful are used for the yard and the garden.radio-controlled remote means that make it possible to control the lighting at a distance of about 100 m. The latter, most often, support work with various types of lamps. To control the LED lighting elements in the controllers, the output stages must be made in the form of semiconductor transistors.
If we talk about remote systems, whereThe control takes place not only with the help of the remote control, but also with voice commands; their connection is possible in the place of the old standard switches if there is an additional power wire.
Remote light switch with remote control, made by hand
- set of radio transmitters MP325M;
- power supplies brand PW1245;
- one-touch switch without locking the contact closure.
For beginnings, the section of the circuit where the modification will be carried out is de-energized. The first thing removed regular switch. Bare wires are interconnected and then insulated.
Understands one of the radio transmitters. Wire segments are soldered to the control button. The received contacts are cleaned and connected to the switch contacts.
If the accommodation is equipped with suspended ceilings,Designed modules can be hidden in the space between the panels. In the absence of such a possibility, the system blocks should be placed in the niche of the plafond, after having performed the isolation of the power source and the receiver module.
After the implementation of the above tasks you canSwitch to lighting control from a wireless remote, or use a standard manual switch. If after some time the system ceases to function, you should not panic. To restore the functionality it will be enough to replace the transmitter battery.
Finally
Remote control of light sources -it is first of all practicality, convenience and a tribute to modernity. It is enough to install a simple light adjustment system, and the problem of changing its brightness, saturation, switching on and off at a distance ceases to worry forever the homeowners.
Наиболее рациональным монтаж системы remote control lighting looks when arranging country houses, which differ in an impressive number of rooms, outbuildings, the presence of a spacious garden.
Одни лишь небольшой контроллер дает возможность manage large-scale lighting systems. Therefore, it is not surprising that remote switches are increasingly used in enterprises where there is a need to control light sources in vast areas of control.