More recently, many works on bondingdetails were performed using a hammer and nails, until they were replaced by construction staplers, who immediately gained extraordinary popularity. And indeed, most operations are much more convenient, and most importantly, they are faster to perform with this tool than with a hammer. Usually staplers are designed to work with staples, but there are models that can hammer even small nails. By the way, the use of staples increases the area of the material that is pressed against the object, because in some cases their use is even safer (when attaching vapor insulation to wooden structures, in furniture production, etc.), which means that it is preferable to use a construction stapler. How to choose exactly what you need? First of all, you need to know what are the staplers?
Types of construction staplers
- Pneumatic. The principle of operation of these tools is based onenergy use compressed air. They are characterized by a high speed of clogging, a great resource and do not require the application of considerable physical effort. Since the centralized air supply from the compressor is desirable for successful operation of these staplers, they are most often used in furniture production. Commercially available portable compressors are quite expensive, and therefore pneumatic staplers are mainly used by professionals.
- Electric. This stapler does not require additionalequipment. The mere presence of a conventional industrial network is sufficient. Like their pneumatic counterparts, electric construction staplers are a rather expensive pleasure, and therefore are also used primarily by professionals.
- Mechanical. Thanks to its simplicity, we got the widestSpread. Mechanical construction stapler is much cheaper than pneumatic or electric, but at the same time it is quite a convenient device for carrying out a wide range of construction works. The main disadvantage is that to push the trigger lever you have to exert considerable physical strength. Depending on the tasks performed, manual staplers have several main varieties:
- Ordinary. For work it is enough just to attach a stapler.to the surface and press the trigger. Consumables can serve as flat staples and ordinary nails. Widely used in the repair work in a variety of areas.
- Staple Hammer. Working on the principle of appropriatethe name of the tool, these construction staplers are used mainly where greater precision of driving is not required, for example, when performing actions on laying insulation under the floor or roofing material on the roof.
- Cable. As the name implies, they are used for laying cables when installing networks and communications.
Staplers Guidelines
Usually working with a stapler is not difficult, but there are some nuances:
- Before pulling the trigger, you shouldpress the stapler as hard as possible to the surface, and the push itself must be performed sharply and quickly. Otherwise, the staple will not fully fit into the material.
- When choosing a stapler, you need to pay attention tothe shape of his arm. It should be conveniently placed in the hand and not cause discomfort, because during further work you will have to withstand the force of impact when struck, which with an uncomfortable part can be a real problem.
- When working with a stapler, you need to keep ticks at hand, which can be useful if the staple is incorrectly or not fully entered into the material.
- After completing all the steps, fold the tool and fix the handle with a special bracket to prevent it from accidentally triggering.
Необходимо помнить, что степлеры строительные are tools of increased danger, therefore, when choosing them, it is necessary to purchase models that have the function of protection against accidental operation, and when carrying out work, strictly observe safety measures.
