Very often those people who are in personal possessionhave cottages, vegetable gardens, are faced with the need to care for the lawn on the site. In such cases, simply do not do without a conventional hand braid or trimmer. The first slowly fades into the background, and the people who use it are getting smaller. The trimmer works automatically and does not require much effort. Especially since there is no special skill to use it.
How does the trimmer work?
The principle of operation of such a device isThe fact that the grass is cut by a special fishing line, mounted on a fast-rotating head. The number of revolutions per minute can reach 8000. For a short time the line becomes worthless, or rather, is erased. Then the gardeners have a question: "How to fill a fishing line in the reel of a trimmer"?
Types of trim tabs
First of all, not to resort to frequentreplacements, it is better to use a denser line. The number of its types and manufacturers is simply amazing. The main parameter of the line for the trimmer is its diameter. It varies from 1.6 to 3.2 mm. The most common species is the 2-millimeter line. However, it must be selected depending on the type of trimmer that you have.
There are several variants of the line cross-section.So, it can be round, square, in the form of an asterisk with sharp edges. The most effective is the last option. However, its use is only on powerful braids and at the same time it is necessary to know how to fill the fishing line with the trimmer spool. Therefore, we can conclude that the more powerful your motokosa, so the line should be thicker.
Such a process, as winding the line on the trimmer, is not difficult, but it has its own peculiarities. To begin with, it is necessary to select the correct line, the diameter of which is registered in the device's passport.
To start, unscrew the coil cover. Be careful, as the carving can be left and right. The left thread is necessary so that the head of the braid does not spin during operation.
Filling the line in the trimmer
Before you add a fishing line to the trimmer spool,measure from a skein of 5 m (so much fishing line on the average it is established on trim tabs). Then fold it exactly in half, in order to find the middle. The obtained center should be inserted into a special slot, which is located on the coil. After this, wind the line in the direction of the arrow, which is on the head.
Из написанного выше следует, что сам процесс Replacement fishing line is not complicated. Having performed such manipulation as winding a fishing line on a trimmer reel, several times, you will bring this process to automatism. The only thing you need to constantly monitor the condition of the fishing line in order to avoid its rupture at the time of work on the site, when the spare coil may not be on hand.
Now you know how to fill the line in the trimmer reel, and you can do it yourself without much effort!
