Fittings: what to look for

Increasingly, amateur anglers use bottom fishing for feeders. However, the beginner may have difficulty with the choice. The equipment of a fidera is presented in huge assortment. How to choose what you need?

Catching on feeder: rigging

Monofil with a diameter of 22-30 mm is used inas the main fishing line. Another option - take the braid 14-18 mm. The line is better to put reliable, because during the casting, the feeder equipment will be subjected to high loads in the event of a large fish hauling in or with frequent hooks.

It is also not necessary to use too thick fishing line, because it will be difficult to throw it over a long distance, and feeder gear should be placed about 70-80 meters from the coast.

Wind approximately 100 m of fishing line onto the spool reel. It is important that there is a necessary reserve in case a break occurs.

The equipment of the feeder itself must be attached through the swivel to the main line.

Fishing on feeder: rigging

Usually, the feeder equipment is made frommonofilnogo fishing line, whose diameter is about 2 mm. In this case, 15-20 cm of line from the junction of the swivel to the main line are measured. Next, apply the counter-twist and put on the fishing line bead to protect the knot from breaking. Then you need to bind the so-called. "rocker" with 2 leads. Equipping the feeder without this unit is impossible, otherwise the leads will get tangled.

The "yoke" is made of thin steelwire. In some cases, a third leash is used, which anglers hang a little higher than the counter twist. But it can lead to overlapping gear. In principle, two leashes are enough for good fishing.

The length can be 10-30 cm. But some anglers prefer to use leashes 7-8 cm long. This allows you to keep the bait as close as possible to the trough.

The counteractor may be curved,and straight. This is a plastic tube. In case a curved counter-curler is used, its longer shoulder should be directed towards the leads.

Naturally, we need the appropriate trough.There are several most popular varieties: rectangular, triangular and round. Weight can also vary in the range of 20-120 grams. It is worth considering that the light trough can carry current. However, a large weight reduces the sensitivity of the equipment feeder. The most versatile solution - a rectangular trough weighing 40-50 grams. Weight is optimal for most places of fishing. In addition, such a feeder will not roll over the bottom, unlike the round one.

Anyway, a newbie is better to purchase severalvarious modifications of equipment. In the feeder arsenal, it is better to have about three or four variants of counter-curlers and feeders. Indeed, in different places there are excellent conditions for fishing. Therefore, the gear will not be superfluous. Over time, every fisherman usually finds his own universal technique of feeding the feeder. But for everyone it is its own. So experiment, try different options and soon be able to find the right solution. And, of course, the best assistants in successful fishing are your own experience and valuable advice from knowledgeable comrades.