Most owners of private suburban housingprefer outer cladding of walls of a neutral, light shade. And there are several objective reasons for this. If the house is surrounded by a garden, lawns, green plantations, in this case siding white in combination with a dark roof looks simply luxurious.
Instruments
- Building level.
- A hammer.
- Screwdriver.
- Bulgarian or hand saw with small teeth.
- Roulette.
- Scissors.
- Ladder.
Installation
Before laying the siding white,a number of preparatory measures. To begin with, all protruding elements are dismantled from the walls. External surfaces are cleaned of dirt, old paint, mold. With the help of mounting foam, cracks are embedded. The walls are treated with a primer and antiseptics.
Siding white is laid on a metal or wooden crate. The latter should form a skeleton along the entire perimeter of the walls, where the installation of the material will take place.
In the openings of the crate,heat insulator. The thickness of the rails here is selected in the expectation that after installing the insulation between the prepared frame and the siding panels, there will be about 2 mm of free space. It is required to create natural ventilation.
Siding white is laid horizontally, startingfrom the base band, the correct position of which is determined in advance by the building level. The following bars are fitted into special grooves. Fastening panels is self-tapping.
Material Advantages
Modern decorative panels from whitePolyvinyl chloride differ in the variety of sizes and textures. Bright lining gives the buildings an extremely spectacular, elegant appearance. Even with a relatively dull surrounding landscape, the white panels are pleasing to the eye.
Due to the specific characteristicsproduction raw materials, white siding does not lose its original shade and brightness, despite the conditions and duration of operation. Material for panel production is safe for humans and the environment.
Care
As the operation wall claddingPVC panels require minimal maintenance. Since the surface of the material is extremely smooth, dust and dirt do not adhere to it. If necessary, the siding can be cleaned with a solution based on a dishwashing detergent. In the end, it remains only to coat the walls with water from a garden hose.
Damaged siding panels are easily dismantled andare replaced by the possibility of a connection in the groove. Proceeding from this, at purchase of a material it is necessary to take care of acquisition of a certain quantity of spare laths.
