Всем хорошо известно, что процесс укладки плитки always accompanied by large material and time costs. This is especially felt if you need to update the tile in the bathroom. Not only will you have to remove the old cladding material, so after that you still need to carefully align the walls. And since our houses, especially the old type, were built with minimal observance of the rules of construction, sometimes in order to bring the walls in the bathroom to mind, we need more than a dozen bags of plaster mix, which, by the way, if it is of high quality, is quite expensive . What to do in this case? There is an exit. You can consider as an alternative this type of work, as laying tiles in the bathroom on drywall. What are the advantages of this method?
The advantages of laying tiles on drywall
First of all, we gain in time.After all, in order to put a tile in the bathroom on the plastered walls, you need to wait for them to dry out completely after finishing. And the process of leveling itself is not a quick task. Most often it is necessary to carry it out in several stages, because, as mentioned above, it is very rare when the base surface requires minimal preparation for the installation process. While you can drywall the walls during the day. And the next - already to begin finishing work.
In addition, laying tiles on drywall inbathroom saves a lot. First, it is possible to install the gypsum elementary with your own hands, the main thing is to be able to hold the drill in your hand. Secondly, drywall sheets are relatively inexpensive, and how much do they need for our small bathrooms? Thirdly, when the tile is laid on the drywall in the bathroom, there is much less glue consumption, since the base surface is almost perfectly flat.
GCR selection
If you have to run in the future suchprocedure, like laying tiles in the bathroom for drywall, then first of all you, of course, have to install this very plasterboard. That is, sheathe the walls. And here is the most important point. Only waterproof plasterboard is suitable for this. And only it should be purchased in the store. Of course, the seller will help with the choice. But in order not to be mistaken, especially if you are new to repairs, you need to remember the following: sheets of moisture-resistant drywall are always green.
Frame selection
Some home-made masters are firmly convinced thatas a framework for the gypsum fit ordinary wooden bars. Perhaps if you decide to sheathe the inside wall of the room. But not in a room with high humidity! After all, the tree can be deformed, which ultimately will lead to disastrous consequences. So keep in mind: tiles are laid in the bathroom on drywall, mounted on a metal profile, not on a tree! And this is an important condition.
Choosing ceramic tiles
Buying tile for the bathroom, you need to payattention to its quality. Tile second grade, different batches, bought on all sorts of sales, it is able to negate all the benefits of laying on the plasterboard. In other words: the base tile on the drywall with high quality and quickly put just will not work. Therefore, we do not save on facing material, we choose the tile, whose corners (if possible, of course) are ideally even.
Appearance matters too. We are not going to talk about design - this is a business. However, remember: the picture you like should be bright, clear, without extraneous inclusions.
Look at the inside out.On a quality tile there is always a brand of manufacturer. In addition, the pattern on it is convex, clear. By the way, the shiny surface of the reverse side most often indicates that mistakes were made in the production process. Before you - the heated tile which will differ in the increased fragility.
As for the hardness of the tile, you can determine this by tapping on it (lightly, of course) with some object. High-quality tile does not ring, it makes a dull sound.
Glue
Laying tiles in the bathroom on drywall is carried out in two ways. This can be done using either liquid nails or tile glue.
The first option is quite “clean” in terms ofwork, the procedure is fast, and the quality of fixing does not cause any complaints. But there is one significant disadvantage. Having a sufficiently large area of the working surface, we, choosing liquid nails, can literally go broke. Material is very expensive, so an economical owner will not even consider this option.
Так что рекомендуем остановиться на плиточном glue. It is easy to work with him, he is plastic, the quality is very, very good, and the fixation is not satisfactory. By the way, many tilers recommend to pay attention to the glue "Eunice". The material will be pleased with an affordable price, in addition, the beginning master will be able to work with him quite simply, since he is very obedient.
Primer
Перед тем как положить плитку на гипсокартон, the latter must first be primed. Better even twice. But here, however, you need to read carefully the manufacturer's instructions. Some primers do not require re-use, so before using the solution, be sure to first read what is written on the package.
As for the types of primer, experts recommend first of all to pay attention to the brand Mira 4120 and Tifengrund Knauf.
Installation of plasterboard
Before talking about how to tileon drywall, you need to say a few words about the installation of the gypsum board. By and large, this procedure is similar to those conducted in other rooms. And this is not the topic of our review today. But on some of the nuances still need to pay attention.
And above all, it should be borne in mind that youra wall of drywall will be glued with heavy ceramic tiles, and not, say, wallpaper, as if it were happening in a regular room. For this reason, the base must be very strong, able to withstand the weight of the tile. Therefore, when exposing a metal profile, try to make the distance between the slats no less than 40 centimeters in any way, which will provide additional strength to the frame.
Tile Works
По большому счету, плитка на гипсокартон в ванной The room is laid in the same way as on the plastered surface. There is no particular difference. With the exception, perhaps, of the fact that the work will be carried out noticeably easier, since the base you have almost perfectly smooth.
It should start with the most prominent angle and bottom.At the height of the second row, using the (mandatory condition!) Level, a bar is screwed to the drywall. As it can be used remnants of the metal profile. Laying start from this support bar. Then bred glue. Many do not need it. Count on so that one portion is enough for two square meters, no more. Especially if you are new to this business. After all, you can linger or get stuck at some stage, as a result of which the solution simply dries. And this is an extra expense, since it can never be re-diluted with water.
The adhesive should be applied in a sufficiently thin layer, and smoothed over with a specially-designed spatula with cloves.
Try to impose on each tilethe same amount of glue to tile lay on the drywall exactly, just like the previous tiles. If you overdo it, gently squeeze out the excess and remove the glue with a damp cloth. Be sure to cross the seams between the seams so that the intervals are the same.
Be sure to check the level of work, how smooth your tile is. Each, of course, control to anything, nevertheless, try to do it as often as possible.
In one go it is not recommended to lay morefive rows. After that, you need to take a short break. You can not immediately load the plasterboard base, you need to give her time to adapt a bit to the rather large weight created by the tiles, along with tiled glue.
As soon as the lined areas are dry,remove the crosses, and clean the tile itself with a cloth. Tile adhesive is very poorly removed from the surface of the cladding material after complete drying. So then it will be rather difficult to cope with it, especially if your tile is not glossy smooth, but grooved.
Grout
Jointing should be carried out not less thanday after work. You need to wait a little while the glue finally grabs. Well, then, using a special rubber spatula, you need to gently seal all the joints with grout. It is better to take the latter with antibacterial fillers so that the mold does not accumulate on the fuge during operation of the bathroom.
Let's sum up the results
And finally, summarize all the information.Remember: drywall under the tile in the bathroom must be moisture resistant (the sheets are usually green). It is impossible to use at installation of a framework wooden bars, it is necessary to apply only metal guides. Tile for the bathroom - not the material on which you want to save. Purchase only high quality tiles. Use in the course of works well proved glue ("Eunice", for example). During the lining after laying five rows take a break. Let your hands rest, and drywall - “get used” to the load.
If you carefully follow all the recommendations, there is no doubt - repairs in the bathroom can be carried out quickly and efficiently.
