Decorative mill for the garden, created by own hands, is gaining popularity as an original decoration of countryside areas.
Which one to choose?
Such elements of landscape design canplay a purely decorative role, and can carry a certain functional load. Everything depends on their design features and purpose. The simplest mill for the garden (with its own hands to make it completely not difficult) perfectly disguises some flaws in the landscape and reliably conceals from prying eyes all the shortcomings: protruding pipes, hatches sewers, etc. Such millers can be of very modest size, often their height does not exceed half a meter . And more dimensional elements can be successfully used for camouflage of a street toilet, an old barn and other unsightly garden buildings.
Decorative mill for the garden, own handsbuilt, can have more impressive dimensions. Sometimes the area of these elements allows you to create inside the structure a cozy gazebo or a cabins for storage of garden tools. True, the erection of such buildings - the occupation is very time-consuming and requires some skills in working with building materials.
Another type of construction is water decorativemill for the garden. Anyone who wishes can erect such a structure with his own hands. It is best to install similar elements near the already existing on the water body: natural or artificial. Near the water mill, you can organize a wonderful place to relax: after a hard day it will be very pleasant to watch the water jets rolling down the blades of the mill and rolling down into the pond.
Decorative mill for the garden with your own hands: stages of work
To build such an original element fordecorating your countryside, you do not need to make a lot of effort and buy expensive materials. A conventional mill has a very simple structure, and it can be built from improvised means. With a minimum of costs, you will have an excellent garden mill, which will serve as a magnificent decoration for your area.
On the chosen site it is necessary to dig a pit deepnot less than 25 centimeters. The bottom of the foundation should be laid with a broken brick and poured with cement mortar. Then you need to make a frame of the future structure. To do this, you can use any kind of cone shaped objects: old buckets, basins, etc. The base of the mill can be made from old car tires. In the upper part of the frame, a small hole must be drilled - the wings of the structure will be installed hereafter. The case should be carefully coated with concrete and covered with decorative stones or remnants of paving slabs. After this, wooden wings of the mill are installed in the prepared hole. They should be painted in advance and thoroughly dried.
This example can be taken as the basis for the manufacture of such structures. And their sizes, shapes and materials can be very different - it all depends on your tastes and wishes.
