Easy installation of a satellite dish. Basics

Currently installing a satellite dishcosts from $ 10 to $ 30, which some seem too high price. In part, these people are right: for turning the plate and fixing the head, one can not demand such a high payment. Moreover, the cost of the system itself decreases every year and, quite likely, will soon be equal to the price of configuration services.

Self-installing satellite dishallows to eliminate this injustice. Moreover, the work is quite simple, and even a schoolboy can handle it in a few minutes. Despite the fact that the providers claim that, for example, the installation of the satellite dish "Tricolor" (and other similar ones) by their own hands is not recommended, since it requires certain knowledge, in fact it is possible for anyone who can drill a couple of holes in the wall of the house , fix the bracket and adjust the steady reception of the channels. And it's never too late to use the services of paid tuners, because the equipment is not damaged during installation.

Placement

The installation of the satellite dish starts with the selectionplace of its location. This is one of the key points to which it is necessary to approach with all responsibility. As you know, in the sky above us there are quite a few broadcasting satellites. The plate should be installed in such a way as to "look" at the right one. The coordinates of each of them can be found on the sites devoted to satellite television. A simpler solution is to see how the system is oriented to people living in your locality and to perform the installation taking into account this feature (for the same satellites).

Installation

The fastening of the plate assumes its placement on thepipe. Therefore, residents of private homes can raise the mast on the spacers or, for example, weld the branch pipe to the grape arch. But high-rise buildings often use a special bracket, which is a metal structure, fixed on the wall with the help of anchor bolts. By the way, installation of a satellite antenna on a concrete basis can be performed using metal anchors, but for plastic masonry, plastic dowels are more preferable. With welding, the frame can be made independently: support in the form of the letter "T", a corner about 40 cm in length and a branch pipe. On the other hand, the market offers finished products: they are neat, but less durable. It is then attached to the plate and roughly oriented in the right direction. Trees and buildings on the receiving line can reduce or screen the signal.

Assembly and adjustment

Before installation, the entire system is assembled according toinstructions: a tube-support for converters is screwed to the plate, the cable from them is carefully attached with screeds or tape. It is important that the points of attachment of the F-wrapping are directed downwards and that moisture does not fall into them. Sometimes they are coated with a sealant and additionally protected with an electrical tape.

Further connection of the satellite dishinvolves placing the collected plate on the bracket. First it needs to be oriented to the sides of the world, and then tighten the bolts. It should be possible to rotate it, at least with effort. It remains to connect the cable with the connector on the converter to the converter, and from the other end - to the tuner. Then you need to turn the TV on and display the level of the received signal in the tuner menu. After that, select DiSEqC in the settings, then the satellite or channel (assuming the receiver is pre-stitched) and, observing the level, slowly turn the dish to get the best signal. It only remains to tighten the nuts.