Сифоны для раковины — это часть сантехнического Equipment that connects the sink to the sewer. Its main functions are the protection of communications at home from clogging and the isolation of the premises from unpleasant smells. The design of nodes of this type is very simple, and therefore installed quite simply.
Types of siphons
Currently, there are only three basic types of such shell assemblies:
Bottle.This variety is popular mainly due to the ease of cleaning. Also to the pluses of the bottle siphon is that it is very easy to connect the plums of a dishwasher or a washing machine.
Трубные.Nodes of this design on kitchen sinks are rarely installed. Most often such siphons are mounted in bathrooms. The thing is in the peculiarities of their design. Once installed in the kitchen, such siphons very quickly become clogged and do not last long.
Corrugated.Recently, these models are becoming more popular. The simplicity of the design refers to their advantages. To collect a siphon for a bowl with a corrugation by own hands will not make special work. The best option for this model can be if the space under the sink is not too large.
Features of the design of the bellows siphon
Чаще всего гофра с сифоном для раковины is made of white plastic. But sometimes on sale there are also metal models. This is a siphon conventional corrugated pipe with two docking nodes on both sides. That is, to the main advantages of models of this type, among other things, you can include flexibility. Siphon is not only easily bent. If desired, it can be stretched or, conversely, compressed.
As already mentioned, one of the main functionsany siphon is the delay of unpleasant smells coming from the sewer. Siphon for the sink with corrugation (photo can be seen on the page) is not an exception in this respect. In conventional models, this effect is achieved due to the presence of a knee in which a thick water stopper is formed. That's why pipe siphons are rarely used in kitchens. The bend is very small. Therefore, with the rare use of such a model, the water plug simply dries up, resulting in smells coming into the room.
When installing a unit such as a siphon for a sink with corrugation, bending is done with special clamps in any convenient place and as large as necessary.
Which model to choose
Siphon for a sink with corrugated technical characteristics can have different. At its purchase it is necessary to pay attention first of all on such parameters, as:
Assignment of the node. Siphon should be designed specifically for washings and sinks.
The material used for manufacturing.Make modern siphons corrugated, usually either from polyethylene or polypropylene. Models made of PP are more expensive, but they last longer, because they are more durable and resistant to dirt and clogs.
The length of the siphon. This parameter is chosen based on the location of the particular shell.
Also when buying a siphon, you should take into account such parameters as the diameters of the sink hole and the inlet to the sewer.
Site installation: preparatory work
Mount the siphon for the sink with corrugation using the following tools:
Screwdrivers. It is better to take a tool thicker.
The gas key.
It is also necessary to prepare a bucket and a large rag.
Dismantling the old node
Remove the old siphon from the sink quite the samejust. First unscrew the plastic nut and remove the pipe. Then the neck is removed. To do this, unscrew the screw inside the sink on the sink. It should simply be firmly held with a screwdriver and at the same time twisting the cone of the neck at the bottom with a free hand.
Under the sink, of course, it should besubstitute a small bucket or put a thick rag. Sometimes the nut and screw can not be unscrewed despite all the efforts. In this case it is necessary to break the mesh in the sink. Do this carefully, lifting its edges around the circumference upwards with a screwdriver, while trying not to scratch the enamel or steel surface.
Siphon for sink with corrugated: assembly
This operation is also simple.Preliminary, a special gasket is placed on the edges of the sink hole. It is also advisable to smear this place with silicone. Further into the hole is inserted the neck of a new siphon with a mesh and screwed with the supplied screw. After it has been fixed, the corrugation itself is fastened to it with a nut.
Included with the siphon of this designThere must be a special clamp. The corrugation is arched in the shape of the letter N and secured with these elements in this position. The result is the necessary "knee". In the next step, the lower bell is simply inserted into the sewer pipe. Everything, siphon for a sink with corrugation is installed. It remains only to check the sink for leaks.
As you can see, the installation of siphon with corrugation providedhis correct choice - the procedure is relatively simple. Only the pipe, a mouth and a collar enter its design. The only difficulty that may arise during assembly is the disassembly of the attached neck or nut of the old assembly.
