Washing machine - not uncommon in modernhouses and apartments. It is convenient, fast and not tiring - the washing process is fully automated. Millions of people appreciated these benefits. However, buying a car is still half the battle. The second half - connecting the device to the water supply, electricity, sewer system. And this process can be a difficult puzzle for beginners. Let's look at how to independently organize the drain for a washing machine down the drain. This will simplify the installation process for many.
Preparatory work, the choice of place for installation
Подходящая модель подобрана, произведена оплата, and now, finally, the long-awaited device was delivered. And what next to do with it? It is possible that the connection has been paid for and the specialists will take care of it. But if not, everything will have to be done independently. The first step is to find a suitable place for a washing machine.
It is better to install the unit in the corner in the bathroomroom or space in the kitchen furniture near the sink / dishwasher. Sometimes, for certain reasons, the machine is placed even in the hallways, under the stairs, in the basements and in the storage rooms - in any places where there is space for the apparatus.
Where the washing machine will be installedCold water piping and drains for the washing machine to the sewage system must be equipped in advance. And this drain is often located in the bathroom or in the kitchen. In any other premises to lay these pipes is impractical and expensive.
Сливной шланг из стандартной комплектации washing machine is different in length up to 3 meters. Experts do not recommend to extend it. A pump that pumps water is calculated on approximately the same three meters. If the drain is longer, the pump may fail.
Another important point regarding the place forthe washing machine is the floor. The best coverage is ceramic tile. The fact is that in the process of work the machine vibrates a lot. Modern floor coverings will become worthless if they are regularly affected by such forces.
Choosing the right place, you can startunpack the equipment. The main point is the special locking screws. In the process of transporting these nodes fix the drum. This is done in order to prevent its movement. It is necessary to unscrew the bolts, otherwise the machine will instantly fail.
Connecting cars to sewage: the complexity of the work
Make a drain from the washing machine insewage with their own hands can and should be. With this operation any master familiar with the sanitary equipment will cope. If there is no experience, then it is necessary to be extremely attentive.
Connection operation may have differentcomplexity. It depends on the distance from the machine to the place of discharge, the material of pipes installed in the apartment, the length and diameter of the connecting hoses included in the kit.
Connection methods
There are several connection options.machine and sewer system. Each has certain disadvantages and advantages, as well as important points. Choosing the right option depends on the characteristics and wishes of the owner. Let's take a look at how to drain the washing machine down the drain.
Очень легкий и простой метод – закрепить шланг for draining at the edge of the sink, bathtub or toilet bowl. There is another method. This is the connection of the drain hose and the siphon of the washbasin. The most popular way is to install a drain pipe with a sewer system through a special siphon. The element is as follows.
And finally, you can always attach the drain of the washing machine directly into the sewer. Below we consider each method in more detail.
Drain into bath or sink
If there is no special desire or skills to work withWith plumbing equipment, you can always attach a drain hose to the edge of the tub. For this there is a special hook. The hose can be short and should not be lengthened - this should be taken into account. The disadvantage of this method is that after each process of washing the bath will have to be washed.
If you decide to use the hook, you mustmake sure its fasteners. If there is even the slightest chance of breaking the hook, it threatens serious flooding. For one ordinary duty cycle of the washing machine, the pump pumps up to 100 liters of water. All this volume should go to the sewer system, but not to the floor.
This drain is most often used as temporary.Home masters use more reliable ways to connect. It is only necessary to decide how to connect the drain of the washing machine to the sewer - directly to the pipe or through a siphon. Next we will talk about this in more detail.
We connect the machine through the sink siphon
Whatever the construction of the sink, under itThere is a siphon. It is necessary to create a water plug. This traffic jam does not allow odors from the sewer to get into the room. To him and connect the drain from the washing unit.
Virtually all outlets between the sinkright up to the bottom of the siphon have the necessary connectors to turn on the drain of the washing machine. These nozzles are hidden under the cork by default. If the hose is missing, you must purchase a new siphon.
Reviews say it is affordable, extremelysimple and at the same time a reliable way to organize a drain for a washing machine down the drain. The most important thing in this case - be sure to install the cuff. It will save from unpleasant odors.
Experts recommend not to handle too muchcompounds with special compounds. If the system is completely sealed, then dirty water from the sewage will be sucked into the washing machine's tank. Such cases are rare, but still sometimes occur.
This method has many advantages.But there is a minus, although he is alone. In the sink there will be water from the washing machine. It is impossible to solve this problem. In the process of washing you will have to try not to use the sink or to organize the drain for the washing machine down the drain in another available way.
A pump that pumps out dirty water is locatedat the very bottom of the washing machine. On the back wall is a special fastener for the drain hose. It is located at a distance of 50-60 cm from the floor. The point at which the discharge tube is connected to the siphon fitting must be an order of magnitude lower than this height. If the hose bends in the form of S, then this is the most suitable option for connecting to the sink through a siphon - note the reviews.
Installation of siphon with check valve
Many modern plumbing devicesequipped with a check valve. It does not allow dirty water to get into the washing machine's tank with clean laundry, and also does not allow water to flow out of the tank. However, the old cars of such a valve in the device do not have.
On sale are siphons equippedspecial valve. It is located in the branch pipe (in the place where the drain in the machine is connected). When connected through such an adapter for draining the washing machine down the drain, many different problems can be avoided. The siphon itself is offered at affordable prices; you can find it in any specialty store.
We connect the drain directly
If the siphon cannot be obtained, then it is worthconnect to sewers directly. But here it is necessary to apply the skills of working with plastic pipes. For the process will need special tools. Also need tees, seals and cuffs, hoses to create a branch.
The simplest option is to mount a tee withtap for washbasin and washing machine. Do not completely seal the joints - enough standard seals. It is unacceptable that the end of the drain in the sewer pipe was wet. The hose must be bent to create a water plug. The connection point is selected above the point where the hose exits the machine.
If the installation location of the washing machine isfar from the sink, in this case you need to lay a horizontal coupler out of the pipes. On the approach to the machine make a bend at an angle of 90 degrees. The height of the drain of the washing machine into the sewer should be at least 30-50 cm.
Drain height
Important in the installation process to ensureThe height from the legs to the drain is not less than 60 cm, if the machine does not have a check valve. The diameter of the tee is better to pick about 40-50 mm. It is necessary that the water jet is broken, otherwise it will be suction.
Typical mistakes
Any beginner home master is not insured.from mistakes. It is necessary to know the places where problems may arise, and to avoid miscalculations in the process of connecting equipment. After all, to eliminate the shortcomings will be very difficult. Often masters make four small mistakes.
Often the connection is performed without duefixing the drain hose. When the machine starts spinning, the water comes out of it under pressure. If the hose is not fixed, there will be enough pressure to pull it out of the sewer system.
Еще одна ошибка – небольшой размер сифона.Each device has a specific bandwidth. If the siphon has a narrow orifice, problems arise with the discharge. Dirty water may rise in the sink.
A long hose is also a gross installation error.The pump is unable to cope with the flow of water through a long hose from the devices to the sewer system. For this reason, blockages and pump failures often occur.
Finally, another misstep is not toodeep sink and drain hose on the side of such a sink. If the drain without a siphon, the tube is better to install on the bathroom, and not on the sink. Otherwise, overflows are possible through the top, and, as a result, flooding of the room.
Conclusion
So we learned how to connect the washing sinkcars to sewage. To succeed, it is enough to follow the advice of experts and not experiment. Otherwise, problems with the operation of equipment cannot be avoided.
