By building your home, you often have todo various work, this includes the connection of all kinds of electrical appliances. This article will tell you how to properly connect the sconce with the switch cord.
Wall light with lanyard
Modern lighting devices havedifferent type of inclusion: using the key, using the button, lace or chain. Wall sconces are an excellent complement to interior decoration, but one should not forget about one more advantage - functional purpose - lighting certain areas of the room.
Wall sconces are great for installation inbedroom, hall, bathroom. Quite often, they illuminate long corridors or certain zones of utility premises with the help of them. It is very convenient to use sconces for reading or needlework, so they are often placed above the bed or over the armchair.
Lighting from wall lights likeUse designers to translate their ideas to emphasize certain elements of the interior and disguise the protruding details. To date, the range of such luminaires is huge, so it is possible to choose different shapes of plafonds, color solutions, as well as different performance of the luminous flux.
How to connect a lamp with a switch with a cord
Before you begin installing the sconce, you need to accuratelydetermine the location of the device, carefully make measurements. This is especially true for twin lamps, which will be located in parallel. To determine the location of the luminaire, you need to take into account the established rules - usually such luminaires are installed at a level of 1.5 meters from the floor. Here, the question often arises as to how to connect the sconce with the switch with a cord so that no unnecessary wires are visible. For this purpose, it is necessary to carry out concealed wiring in advance for the subsequent connection of the lighting fixture.
The installation itself begins with the connection of two or threewires. Before this, the network must be de-energized, and the work will be carried out using a sharp knife and an insulating tape. First, the insulation at the ends of the wires is cleaned - approximately 5-8 mm. Then the stripped wires must be bolted to certain terminals.
Possible types of connection
In this section of the article, we will describe how to connect the switch bracket with a cord with two or three wires.
1. With the existing three wires: ground, zero, phase. They are connected to certain terminals, clamping the tip of the wire with a clamping bolt.
2. With the existing two wires: a white or brown wire (phase) is fixed to terminal L. The blue wire (here there can be any shades of blue) (working zero) is connected to terminal N.
After all the wires are connected, you need to close the housing by placing a protective cover. The lamp is attached to the wall with self-tapping screws.
So, how to connect the sconce with the switch with a cord, we figured out, it remains only to install the lights and check the lighting device.
Sconce for bedroom and children's room
Choosing a lamp of a certain model, shape,color, it is necessary to think over in which room it will be installed, because different rooms are suitable for different lamps. For example, a sconce in the nursery or bedroom should be with a soft diffused light. Such lighting relaxes and prepares for sleep. Here, a dense shade on the lamp or matte shades is perfect. For the children's room you need to take care of everything else for safety: here the sconces can not be crystal or glass so that the child does not accidentally break them and get hurt.
Very convenient when the lamp changesbrightness of lighting - you can replace the chamber light with more bright when you want to read. For the children's room it is also very convenient, because children are often left with a weak light for the whole night, so the sconce can serve as a lamp and night light. In nightlights, the use of LED lamps is quite popular, as they save electricity.
Where to install sconces in the bedroom and nursery
Обычно настенные бра со шнурком в спальне set at the head of the bed. If the bed is double, then one lamp from each side. If the bed is single, then one lamp from one side. The way to install the sconce into the children's room is slightly different: here it is usually installed over an armchair, so that an adult can easily read fairy tales to a child before going to bed, and the light does not prevent the baby from sleeping. At the same time it is very convenient to use a switch with a cord switch to turn it on and off, without getting up from the chair.
Wall sconces are great for bedrooms andchildren's rooms, as they not only serve as decorations, but also add functionality to the bedside area. They do not occupy space on the bedside tables, thus making it possible to put more necessary things on it.
Sconce for hallways and bathrooms
Светильники в прихожую и ванную выбираются по other criteria. Often these are small rooms where the wall lamp is the main source of light. But for a more spectacular design, these rooms are specially designed for illuminating mirrors and the most significant areas. When choosing a lamp for the bathroom, it is necessary to take into account the humidity of this room: most likely, you will have to purchase a waterproof lamp here. And in order for this device to look better, it is necessary that the plumbing materials are combined with the lamp.
Lamps in the hallway you need to choose bythe following principle: they should not differ too bright light, because a person comes here from the street or from the entrance and a bright light in the eyes causes not too pleasant feelings. If the hallway in the apartment is made in the form of a long corridor, then several identical sconces arranged in a row will look great here.
