If you've heard of the Hercules brand,dry mixes from this manufacturer should be known to you, because they are quite common in the market of building materials. They are gradually replacing sand and cement based compounds, having more outstanding performance characteristics. It is very convenient to breed them and work with them. Depending on the destination, the compositions "Hercules" are facing, masonry and plaster.
Plaster and putty
Plaster mixture "Hercules" has a highstrength, does not involve the use of putty, after applying you will be able to get a glossy surface. It is possible to work with such compositions both manually and by machine application. The composition is well distributed, and then perfectly lends itself to the alignment process. The surface after treatment will not be afraid of moisture. Before starting work, you can choose the fractional composition to obtain the desired layer thickness.
Have excellent quality and putty from the company"Hercules". Dry mixes of this kind can be composed of gypsum and do not shrink after application. Packing is very convenient (3-15 kg), which allows you to purchase the amount of material you need, and not to overpay for the mixture, if you need a small amount.
Masonry mixes
If you need to purchasemasonry mix from a wide range of products you can choose a composition with the desired qualities. This may be a material, for example, with the refractory or frost-resistant characteristics of the Hercules brand. Dry mixes of this type demonstrate excellent stacking and ductility. They can be applied to surfaces from almost any material, due to the high level of adhesion.
Masonry compositions are used for installation.elevated structures and foundations of buildings. Excellent composition in soils with normal humidity. When using the composition of the brand M-100 consumption will be equal to 1.67 kg per 1 m2if the deposition thickness is equivalent to 1 mm.
Screeds and mixes for arranging floors
Compositions are often used to level the floor."Hercules". Dry construction mixtures perfectly fall on the surface when arranging screeds. For repairs, you can choose floor leveling, self-leveling powders, screed compounds. It is recommended to choose a product of this brand for installation of systems based on cement and polymers.
The peculiarity of the use of the mixture "Hercules" when leveling the floor
The compositions intended for leveling the floorinvolve the use of certain knowledge and experience when working with them. The basis of the preliminary to be prepared. To do this, remove trash from the surface. Using solvent, it is necessary to eliminate the remains of paint and oils. The floor should be washed and dried well. If there are not enough reinforced elements on the surface, it is necessary to get rid of them.
The day before the start of work you need to close up the seams andjoints. Next, apply a primer mixture. If you have to work with a base with good absorption, then apply a primer composition in 2-3 layers.
Before the process you need to prepare:
- lighthouses;
- level;
- a piece of chalk;
- cable;
- bucket for mixing the solution;
- primer;
- drill with nozzle;
- priming roller;
- needle roller.
If you decide to use the product during the repairthe company Hercules, dry mixes from this manufacturer should be applied on the beacons. On the draft coating should determine the highest point of the surface. This can be done with the help of a laser level, but the traditional building one will do. At the point of maximum peak should be placed beacon. It must be made of rail. Such beacons are installed at several points around the perimeter of the room. Now you can begin to pour the solution onto the floor surface. The layer is treated with an aeration roller, which will eliminate air bubbles. To pour the next portion of the composition proceed after 10 minutes. After 20 hours, it is permissible to continue to work with a fully finished screed made from the material of the Hercules brand. Dry mixes are created taking into account the need for rapid solidification. If there is some kind of finishing coating on top, then it should be started in 2-3 days.
Glue compositions and joints
In the range of materials "Hercules" canfind adhesives for laying porcelain, tiled and mosaic tiles. After completion of such work, you can use the mixture to fill the seams of both facade and floor tiles. You can choose a mixture with the desired color. The jointing will have excellent characteristics, have impressive strength and elasticity. It is possible to stack mixtures on any surface, since they have an increased adhesion, protecting the seams from moisture, which is especially important when working outside buildings or in bathrooms. Fungi and mold will not appear on the surface, as antifungal ingredients are included in the composition of grout.
If you need to repairpremises, then for the implementation of work in the field of floor you can purchase the entire product range from one manufacturer. Building mixtures "Hercules" are represented by leveling compounds, adhesives, as well as grouting.
