If you are interested in the Belmash SDM 2500 machine,then you should be aware of the fact that it is the equipment that has the highest capacity among the models in this series. The device is characterized by unique operational and technical qualities. Thanks to them, a device with equal efficiency can be used to solve problems in everyday life and small-scale production. However, if you do not often use such equipment in your household, it is recommended to purchase equipment that will be cheaper and simpler in functional terms.
Appointment Reviews
The machine of the brand "Belmash SDM 2500" is intendedfor processing wood products, they, according to users, can have different shapes and configurations. The design can be used for a long time, it has a compact size and not so impressive weight. Additionally, consumers are turning their attention to an affordable price. If you are considering such equipment and want to purchase it for yourself, then, first of all, it is necessary to consider possible operations. To do this, you should read the information from the technical passport, as well as performance.
Consumers point to the need for trainingsustainable desktop, as the equipment has not so impressive height. You can consider the option of buying a finished design, which was made in the factory. According to the buyers, the equipment of the Belmash SDM 2500 brand can:
- planing;
- fug;
- sawing;
- to mill;
- drill.
If you need to shake off the part, then youshould know that the device has several processing modes of this type, it can be work with edges, edges and plates. But the sawing can be done along and across the fibers of the workpiece.
Cut at an angle
Especially often users are cutting at an angle, for this the manufacturer has provided a special device. But you can mill with the help of end and disk mills.
"Belmash SDM 2500" can be used on openplatforms, in non-residential premises or under a canopy. In order to remove production waste, the design has a pipe for connecting a chip conveyor. It is also necessary to take into account the fact that the equipment does not have special protection against moisture. If you want to transport equipment, then you need to install it on a work surface, securing moving parts before it.
Reviews about the positive qualities
The Belmash SDM 2500 machine possesses a setadvantages, but also disadvantages, it is not deprived. For example, the manufacturer took care of reliability, for this purpose, changes were made to the design that had a positive effect on the duration of operation. According to customers, in the hinge pairs, which are located in an acute-angled table, inserted bearings. They increase maintenance-free time. For the reason that the design has a small size and weight, in the frame there are additional stiffeners. Buyers claim that this addition can increase the stability of the structure.
A positive feature can be called andbuild quality, blocking planer locks, as well as the presence of components with which the user can increase the number of operations performed. Not to mention the welded design of the housing, due to the absence of bolted connections, the backlash is reduced during operation of the machine.
Security
For maximum security, you do notYou will be able to perform two manipulations simultaneously, this is ensured by locking the tables. The device can be connected to a household electrical outlet. Turning off and turning on the machine can be accomplished with a moving unit, with its design it is possible to easily change the position, which, of course, will depend on the location of the operator relative to the machine.
Negative feedback
Станок деревообрабатывающий «Белмаш СДМ 2500» It also has some flaws that users find less impressive. For example, the manufacturer did not take care of the presence of a measuring line on the surface of the desktop. When fixing the height of the disk, during which the lamb is applied, it is displaced relative to the vertical plane. That is why the user has to control the cutting angle manually.
Additional expenses
The disadvantage, according to buyers, you canconsider and the need for additional acquisition of the compressor. It will allow to get rid of excess chips during the operation of the machine. One of the problems is the clogging of the discharge channels a short time after the start of work, this may cause a decrease in the quality of processing products.
Reviews about technical characteristics
Деревообрабатывающий станок «Белмаш СДМ 2500», reviews which can help you make the right choice, has unique characteristics. In order to learn how to work with a machine, you must study them. For detailed consideration it is best to analyze each function separately. For example, the dimensions of the structure are as follows: 94.9x84.9x51.2 cm. The total mass of equipment with additional components is no more than 56 kg. Rated power consumption when connected to the electrical household network is 2.5 kW. This, according to buyers, is quite enough to process even massive wooden blanks at home.
You should consider in more detail andplaning characteristics. Thus, the maximum width is 270 mm, but the maximum thickness of the workpiece is equivalent to 65 mm. The value is indicated with the condition of using the mode device. In one pass, you can set the depth to 3 mm. But the permissible dimensions of the part to be processed are 200x27x11.7 cm. When consumers buy the multi-functional Belmash SDM 2500 woodworking machine, they also pay attention to the table sizes, they are 90x28.7 cm from the described model. made of plastic, in practice it is not used, since it has a rather poor performance characteristics. As an alternative solution, consumers use home-made designs.
Sawing blanks by usingdisk, which is located in the central part of the desktop. The design assumes the possibility of changing the position relative to the surface. This allows the user to adjust the cutting depth.
Reviews about sawing performance
"Belmash SDM 2500", the clamping device which,as mentioned above, are often not used in practice, has certain characteristics of sawing. For example, the depth range varies from 0 to 11.7 cm. But the size of the disc cutter for Belmash SDM 2500 is not more than 12.5 cm. According to customers, the maximum possible diameter of the disk is 31.5 cm, but the ranges cutting angles along the fibers are 45 °, if we are talking about transverse processing, the degrees can vary in both directions.
Users advise instead of saw bladeuse the drive when the formation of the grooves of a special form. It is important to note that this item is not provided as standard equipment. The end mill should be used on a separate desktop, through this node you can perform drilling, and for this the consumer will have to use a special cartridge.
Reviews of end drilling performance
Consumers pay special attention tomilling characteristics, while the range of diameters can vary from 6 to 12 mm. The size of the desktop in this case is 47x19 cm, and the shaft speed is 770 revolutions per minute. To install the equipment, the minimum area of the table is required, which is limited to the following dimensions: 44.1x24.6 cm. Consider ensuring the stability of the device. As buyers emphasize, otherwise vibration can occur, which causes defects on the surface and equipment failure. If you use the Belmash SDM 2500 machine according to the instructions, the reviews about which are often only the most positive, then the deviations of the angular dimensions will not exceed 5%. But an increase in machine power is possible by 15% or less.
Positive feedback on performance
According to users, thisequipment is the perfect combination of price and quality. The device planes and saws, and its adjustment is relatively simple. The user will be able to install the mill, and in the process to develop creative thinking. If you need to periodically carry out work in the workshop or in the country, which do not provide for special accuracy, then this unit is perfect. The engine is powerful enough, for the semi-annual practice, the majority of users did not let it down even once. The clamping device greatly helps some users, despite the fact that its quality, as mentioned above, is not so high.
Using the machine brand "Belmash SDM 2500", reviewswhich helps many users to make a choice in his direction, consumers say that he is happy with the cutting height, as well as the high quality of the disc. It should be noted also the minimum curvature of the working surface. To raise and lower the work saw, you do not have to make special efforts; it is quite simple to carry out these manipulations. The manufacturer also took care of a smooth start, which is well manifested in the work. Handle start and stop made thought out, it marks a lot of buyers.
Conclusion
Довольно часто в работе с описанным выше equipment has to use cutters. For "Belmash SDM 2500" you can purchase such consumables for 1500 rubles. Consumers can also be concerned about the question whether it is possible to eliminate the curvature of the table. Many users try to solve this problem. However, perhaps, it can be called one of those that are not so significant in working with such equipment.
