The tip is cable. Features of modern models

To terminate conductive veins in modernIn production, the cable bolt is used. The method of screwing the hexagonal bolts in this case is the attachment of the tip on the core. When reaching a given effort, the head simply breaks off. Thus, the connection becomes reliable and durable, it meets all state standards and requirements.

Tip Information

For cable connection and termination, the most commonly used cable terminal is under pressure.

It is necessary to fully control the penetration of the cable inside the tip to ensure a reliable connection.

In this case, the tip size becomesquite an important factor. In addition, the correct choice is necessary degree of sealing and compression of the junction, the size of the working tool and the connecting sleeve.

Connecting sleeves and cables for crimpinglabeled at the production stage. Thanks to this labeling, it becomes easier to understand for which cable a particular product is suitable. The contact connection will be of high quality only if the dimensions are selected as correctly as possible. Then the cable tip becomes the most efficient and reliable.

The cleanness of the contact surface is one offactors that ensures reliable operation of the contact connection. This also contributes to the contact pressure necessary for the correct operation of the entire system as a whole.

In order to achieve good performance, it is necessaryFirst, completely remove the oxidation film, PE insulation or paper insulation from the surface of the tips, sleeves or cores. The oxidation film should not be present on the surface, because its electrical conductivity is rather low.

About cable lugs for crimping

Cable tip of this type can bereusable or disposable. In the case of disassembly, reusable cables are much easier to disassemble and then re-install them in the same place. Disposable tips differ in the fact that they need to be pressed.

Inherently copper cable lugs, the price of which can be different - this is a hollow glass, which is made of soft metal.

High-quality crimping and reliable cable crimping are guaranteed only if the type and size of the cable lug is correct, the dies are matched correctly.

Aluminum tips

The integral connection of aluminum conductors is the main task that aluminum tips perform.

Products made from this metal used in pureform, generally considered the most suitable for modern cables, because they provide reliable operation of the entire structure. In other products may use impurities, which sometimes adversely affect the qualities of the source material.

In addition, widespreadcopper cable lugs for crimping. Their installation takes only a few minutes. But in terms of strength, they are not able to circumvent aluminum products. However, in this case, an integral monolithic compound is obtained, which provides high-quality connection.