Crosscutting machines are used by professionalbuilders for wood processing. Modern versions are available with adjustable spindle units. All this allows you to more accurately control the angle of the cut. Some modifications are made with milling blocks. They stand out high power. To adjust the bed used flywheels. Some modifications are found with pendulum devices. There is a good trimming machine for wood (market price) of about 250 thousand rubles.
Handheld devices
For a small workshop is greatcompact manual trimmer for wood. It includes a small caliper, a spindle assembly, and a frame. The sawing area itself is regulated by the handle. Such devices are well suited for processing oak products. If necessary, the modification can be made independently, and the easiest way to install the frame is from cast iron. Modifications are low productivity. However, it is worth noting that the models can be made with adjustable guides.
Low power machines
Woodworking equipment of low powersuitable for cutting billets of small length. Also devices are used for milling. However, it is worth noting that there are modifications on the market with power-driven and non-power units. In the first case, the cut speed can be adjusted. The height of the workpiece is configured separately. Non-power modifications are simpler and are characterized by ease of use. They use motors on terminal boxes with contact anchors. The maximum power of such modifications is 4 kW. For small workshops they are well suited. However, it is worth remembering that the angle of cut is quite difficult for them to adjust.
Industrial modifications on the market
Industrial trimming machines for woodcharacterized by high performance. Calipers in most cases are made with pendulum mechanisms. Some modifications are equipped with panels to protect the operator. It is also worth noting that modifications with a double spindle assembly are on the market.
Adjustment of the workpiece height is carried out foraccount of long guides. Also, industrial modifications have a handle fixing the workpiece. Some models can boast a high-quality motor collector type. Drive units are usually used with a belt adapter. Modifications are able to work with large blanks.
Pendulum mechanisms
Tortsovochny machine for wood (pendulum) inMainly produced with a single phase motor. The models have two pairs of supports. When this rotor is used on the collector. Some modifications are available with a short spindle. The fitting in the devices is made with a large tip. Modifications of the pendulum type are suitable for all work on milling products. It is also worth noting that the models are used on the beds of the movable and fixed type.
Some devices are found with a frequency above3 thousand revolutions per minute. They use an adjustable caliper, and provides high conductivity. Controllers are very rarely installed on modifications. It is also worth noting that the models are not suitable for longitudinal cutting of wide blanks. Rails are most often installed above the spindle and take up a lot of space. As a result, the devices are large and inconvenient to transport.
Automatic woodworking equipment
Automatic trimming machines for woodare made with controllers of different frequency. Many models are equipped with collector motors, which are able to work in different modes. It is also worth noting that there are devices with additional stops. Billets are stacked on the platform. Spindle units are often used on belt drives. Handles and flywheels are used to adjust the height of the working area. More on the market are modifications for two unions. They have very wide beds.
Modification of 3 kW
Деревообрабатывающее оборудование указанной power suitable for turning works of varying complexity. Modern modifications are made with blocking collector motors. Spindles are used with and without interlocks. Modifications for milling products are distinguished by high-quality adapters. Guides they are installed with racks. To protect the equipment used casing. Also on the market are devices with fixers blanks that can be adjusted using the module.
Build model 5 kW
Wood milling machine, 5 kW suitablefor cutting oak bars. Also, devices are actively used for milling boards. Many modifications include manifold motors with belt drives. There are also modifications on the controllers, which are able to engage in precise cutting of wood at an angle.
When choosing a modification, special attention is worthgive guides. As a rule, they are mounted on stands at the top of the frame. There are still devices with lower caliper position. They are characterized by high performance. However, they have a small work surface.
10 kW devices
Wood milling machine for 10 kW prettyoften found in industry. In this case, special attention is paid to the security of the operator. Directly rotary boxes are made with a terminal block. It is also worth noting that the market offers gear devices that allow you to adjust the speed of milling products. Modifications with automatic control are expensive. When choosing a modification, pay attention to the management angle. Old models on flywheels are not able to provide high-quality wood cutting.
Device with upper caliper
Machines with top caliper in the firstall ensure good performance of the unit. However, there is a lot of pressure on the frame. The shafts of the modifications are applied to a small size, and they have a very high rate of frequency. In a minute the shaft is capable of making more than 2500 revolutions.
Fitting devices for machines of this typeused with elongated rods. Rods can be installed with or without an overlay. Also on the market are many modifications to the drive units. For professional wood cutting only models on controllers are suitable. When choosing a device with the upper caliper is to look closely to the frame of the goods. The bed must be made with long length stops. All clamps must be fixed from all angles.
Model with lower caliper position
Wood milling machine with bottom supportshows itself well when cutting wide logs. Many models have a double spindle, which is powered by the shaft. It is also worth noting that the market is filled with modifications on the collector motors. They work with a frequency of not less than 2300 revolutions per minute. There are still devices with interlocks.
Directly rotors are used with systemsprotection. Professional machines can be equipped with dust collectors. Racks in devices are made of cast iron and steel. Guides are mounted both above and under the frame.
Model with two pintles
Wood milling machine with two quill holessuitable for turning products of various shapes. If you believe the experts, the manufacturers provide modifications mainly from the top of the caliper. Directly the spindle is installed above the platform.
The saw blade is often protectedplate to protect the operator. In some cases, collector motors are used that can be operated by modulators. Thus, the saw process can be controlled from a distance. Modern modifications emit high-quality calipers with lining. Adjusting pins are found in different lengths. Controllers are used to control the platforms, which are configured by the handle. It is also worth noting that some manufacturers make devices with small plates that are not suitable for large workpieces.
