Every motorist should be ready forall kinds of breakdowns and other unexpected nuances, regardless of the brand, condition and year of release of his car. Take, for example, a situation where you, having left for nature or when you are far from home, accidentally lost or broke the ignition key. Such cases, as practice shows, are not uncommon.
So, how to start the car without a key?It would be ideal if there was a multitester on hand, but otherwise a regular flashlight bulb would do. The key inserted in the ignition can have three states: it is the power turned on and off, and also its supply to the starter.
Focusing on this, you need to find three groups.wires. The first ones are those that carry power from the battery, the second ones give it to the car, if they are hooked up to the first, and the third to the starter when connected to the first. Usually the second and third groups exist in the form of a single wire, so it will not be so difficult to figure out how to start the car without a key.
So, food is basically the thickest andbright wire, in some cases there are several. Grounding is usually black or green. If the power is a bundle, then we check every entry in it by the multitester, and in the absence of one, we close it for a short time with a minus and check whether sparks are coming.
Checked out?We continue to understand how to start the car without a key. Now all those wires that give a spark, and a minus need to be separated. To find the one that feeds the starter, you need to put the car in neutral and the handbrake. Next, check the rest of the wiring by connecting to the power supply until the starter is working.
Next, to start the car without a key, we connectpower and grounding, sealed them with tape. Those wires that carry power to the starter, we close the rest of the wiring before starting the engine, after which the power must be removed.
In case you need to open the car, you can try to do it with a wire hook. It is necessary to find the usual wire and bend it into the desired shape at an angle of about 450, the bent part should be no longer than 10 cm.Next, push it between the glass and the window seal near the handle, trying to hook the rod with the button and lift it up. Such an opening of the car door is ideal for domestic models.
For the second option you need a loop of rope or fishing line. But it is only suitable if the button in the door has a ledge upwards.
Есть еще вариант с проволочным крючком для imported cars. The hook must be pushed inside the door by hooking and pulling the handle. You can push the wire, if you bend the corner of the door with tools or improvised means.
If the battery is low, and the central locking isThe alarm can not open the door, you can use the lock cable in the hood, hooking him with something and jerking sharply at himself. If possible, you can connect the power using a different battery by connecting wires to the ground and the starter.
And, of course, the simplest way is to break the glass, if the weather permits.
Now, having the knowledge of how to start the car without a key and how to open the doors, it is not so scary to get into such unpleasant situations.
