In conditions of limited visibility, and especiallyat night, any car becomes a means of increased danger, because at this time the probability of emergency situations increases significantly. To prevent this, many drivers use different means. The most popular of them recently became gas discharge lamps. They are devices based on the use of an inert gas. Such lamps can be divided into two types - xenon and bi-xenon. In this article we will focus on the difference between xenon and bixenon. It should be noted that both one and the other device can improve visibility several times.
Such technologies are now used instandard equipment of many luxury cars. Lamps biksenon and xenon (the difference between them is described below) provide a very high quality lighting route. The usual halogen lamps in this indicator lag very significantly. Another advantage of gas-discharge lamps can be called the fact that, despite their brightness, they do not dazzle the eyes of drivers of cars moving in the opposite direction.
Xenon concept
Xenon operates at the expense of inert gas.From the usual car headlights, these lighting devices are distinguished by the absence of a filament. The main principle of xenon operation is based on the fact that a high voltage passes between a pair of electrodes. It is this which causes the gas that fills the lamp to glow. Radiation is produced at the output, it is constant and does not change its direction. Xenon headlights are quite economical, because the minimum period of their use is about two years. As for the necessary voltage pulse for the device, it is created at the expense of the ignition unit. Compared to standard lamps, the cost of xenon is higher, but this price can be called justified, because the device improves traffic safety.
The concept of Bi-Xenon
Первое, чем отличается ксенон от биксенона, - это the time of his appearance. The fact is that bi-xenon as a type of gas-discharge lamps was invented a little later. A mechanism is built into it, the purpose of which is to change the direction of light radiation. This device is a metal shutter (it is also called a "floating bulb"), the movement of which occurs due to the action of a magnet. This allows you to open different areas of action. Switching itself is carried out by cutting off part of the luminous flux. As of today, the leading indicators in the list of the best lighting fixtures belong to this type of lamps.
Problem of choice
При эксплуатации автомобиля важнейшее значение, no doubt has the safety of the driver and his passengers. Motorists often improve some parts of the car, including lighting. In this regard, many of them are wondering about what is better: biksenon or xenon? Most experts recommend to opt for a more modern first version. At the same time, it is impossible not to note the fact that installing xenon headlights will also provide much better illumination compared to filament lamps.
Brightness, reliability and economy
Принципиальное у ламп, таких как ксенон и Bi-Xenon, the difference, as previously noted, is the organization of focus. For parameters such as efficiency, reliability and the degree of brightness of the light, they are the same. In the case when the car is not equipped with separating optics, it is better to give preference to Bi-Xenon, which can even be installed independently, without certain skills. In this case, it is important to simply study the instructions well. As for the choice of goods, then attention should be paid to the designation of the base.
Near and far light
The key to these types of lamps, as xenon andbiksenon, the difference lies in the use of lighting modes. The fact is that the first type is used only to obtain a passing beam. As for bi-xenon gas-discharge lamps, the technology used for them provides the ability to change their focal state, in other words, to switch the dipped beam to the main beam, and vice versa.
Cost
Far from the last role in the selection playsthe difference between xenon and bixenon in monetary terms. The minimum cost of a set of the first type of gas-discharge lamps, taking into account the installation, will be about 1900 rubles; for the simplest set of the second type, you will have to pay about 3000 rubles.
The most common combination
Самой большой популярностью у водителей, которые are well aware of the difference between xenon and bixenon, now the combination is used, when halogen lamps are used for high beams, and xenon lamps are used for dim lights. The explanation is very simple. The fact is that a very bright high beam is usually required only for long trips outside the cities. According to statistics, about 90 percent of trips are carried out by most drivers for not very long distances, usually in terms of localities.
conclusions
Knowing the difference between xenon and bixenon, makechoosing one or the other is quite simple. Both types of headlamps are sold in almost all auto shops and can significantly improve driving safety. The main thing to remember is: these lights are a source of high voltage, so you should not allow the operation of a car if they fail, you should immediately contact a service center. Otherwise, the likelihood of device fires increases.
Подводя итог, следует отметить, что принцип Xenon and bi-xenon headlights are identical. Standard lamps of the first type can function in the mode of both low and high beam. In the second type, this possibility is combined in one spotlight, in other words, the bi-xenon switches by adjusting the direction of the light flux. Therefore, many experts prefer him. At the same time, both technologies are modern, and most motorists make their choice on the basis of their budget, vehicle configuration and personal preferences.
