Spinning brand "Aiko" are differentquality holders. Forms for models are often made with long racks. Protective plates are made of graphite. The test parameter for the models is quite different.
Racks in forms are most often treated with epoxyresin. Rings on them are set small. Coils, as a rule, are of inertial type. It is worth a good spinning of this brand in the store no more than 6 thousand rubles.
Varieties of spinnings
The spinning of this company is different in size.There are light, medium, and heavy modifications. The forms they can be fiberglass, graphite, or titanium. The holders are installed open and closed type. Also the spinnings differ in strength. Models of low elasticity are suitable for catching fish of small size. Spinnings of great strength, as a rule, are used by professionals.
Description of the models "Dixie"
Data from high tensile strength spinnings reviews, likerule, get good. The stand of the model is of a small width. The holder under it is made of graphite. If you trust the feedback of buyers, the coil in the device is of high quality. The retainer is used with a large ledge and works well.
The spinning blank has a high degreeabsorption. If you trust the reviews of buyers, then the blue on the model is caught remarkably. Fixtures in this case can be applied in weight up to 130 g. The indicated spinning "Hayko" (market price) does not exceed 4400 rubles.
Responses of owners about spinning "Ranger"
Many buyers spinning "Hayko Ranger"valued for a solid form. If you believe the fishermen, the coil in the device is regulated without problems. The test value is exactly 4 ounces. The equipment of a small weight is thrown very smoothly. If you trust the reviews of buyers, then Dalley on the model is caught perfectly. Directly the lower part of the column is treated with epoxy resin. For fishing from the boat spinning is not bad. However, before buying, please note that it does not have a clamping nut. Thus, the mounting of the coil is sometimes weakened. It is worth spinning in stores no more than 5200 rubles.
Opinion about the models "Butch"
These spinners "Aiko" are great forprofessionals. Among the features of the model should be noted long holder. The rack in the device is used with two protective nuts. The model is well-finished with epoxy resin. If you trust the feedback of buyers, then the fastening at the coil is capable of withstanding heavy loads. At the bottom of the rack is a reinforced ring.
The plate of the blank fixes it well.The spinning test is at 4 oz. If you trust the reviews of buyers, then for fishing kaluga model is suitable. However, before buying a spinning, it is important to consider that the model uses closed type holders. The Kevlar pad is applied at the bottom of the form. The indicated spinning in our time is no more than 6 thousand rubles.
Description of the models "Lanzar"
This spinning "Aiko" for jiga uses a largepopularity among professionals. Its stand is made entirely of graphite. If you trust the reviews of buyers, then the coil works wonderfully. In this case, it is of the inertial type. In total, the spinning uses two clamping rings. The lower part of the rack is treated with epoxy resin. The electrical conductivity parameter in this case is 5 μ. The model has a blank with an overlay. It is made entirely of fiberglass.
The test score of the modification is 5 ounces.If you trust the reviews of buyers, then the plate holders are executed quite qualitatively. For catching bream, the model fits perfectly. Tooling is allowed to use weight up to 160 g. Clamps in spinning are capable of withstanding heavy loads. The transmission rings are good at damping vibration. The degree of elasticity in them is quite high. The resistance parameter for break is 6N. In the shops this spinning user is able to buy at a price of 4600 rubles.
Reviews of owners about spinning "Baltasar"
Spinning "Aiko Balthazar" great matchfor catching zinc. They have a rack with Kevlar coating. The maximum conductivity index reaches 3 microns. The parameter of the spinning test is 3 ounces. The blank is used with the overlay. The coil is provided by the manufacturer of the inertial type. The resistance to breakage in this case does not exceed 7 N. The holders of the model are of questionable quality.
If you trust the reviews of buyers, then for catchingBream spinning does not fit well. The transmission rings do not have good flexibility. Tooling in this case, the user is able to apply weight up to 170 g. The plate under the coil is set to a small thickness. Weighs this spinning is extremely small and in circulation is quite simple.
Rigging equipment weighing up to 100 g is cast very accurately.The upper part of the form is well fixed. The retainer at the coil is used without the holder. If you trust the reviews of customers, then for carp fishing the model fits perfectly. Stand spinning "Aiko" on the market about 5300 rubles.
Opinion about the models "Diestro"
These spinning "Aiko" reviews, as a rule,get good. The holder is made of Kevlar. Directly there is a rack with screw terminals. If you trust the reviews of buyers, then the coil works very well. The lock will turn on smoothly. The test result for spinning is a maximum of 5 ounces. With the elasticity of the model everything is wonderful. The rack is fixed in this case reliably. The balancer in the device is on the plate.
The resistance parameter at break is notmore than 12 N. At the base of the form is a reinforced ring. In this case, the top of the rack is not treated with epoxy. If you trust the reviews of buyers, then for catching white-eyed spinning it fits perfectly. The impact resistance of the model is not very high. Also, owners often complain about the transmission rings. The legs of the spinning are of the single type. The attachment under the blank is used in a graphite braid. The price for this spinning starts from 5 thousand rubles.
Description of the model "Isabella"
These spinning "Aiko" are produced with twographite holders. The stand of the model is very short. For carp fishing the device does not fit the best way. The parameter of the spinning test is 5 ounces. If you trust the reviews of buyers, then the coil is of high quality. The plate below it is attached. Tooling for the model is allowed to use up to 180 grams.
Для ловли даллий она подходит замечательно.The total spinning length is 2.3 meters. The energy absorption index is at the level of 88%. The leg of the coil is rather short. Protective spinning rings have low elasticity. If you trust the reviews of customers, then screw holders can sometimes be erased. It is worth spinning in stores no more than 5400 rubles.
Responses of owners about spinning "Margarita"
These "Ayko" spinnings are suitable for fishingcarp, as well as beetles. The rack is of high quality. If you trust the reviews of buyers, then the coil is used with a good clamp. However, the rack is of short length. The test score is 6 ounces.
Spinning tools can be used in weight up to200 g. For catching beluga, the model fits perfectly. The ring holders are located only in the upper part of the blank. The parameter of resistance to break is not more than 4 N. Spinning in specialized stores costs about 6 thousand rubles.