Homemade crossbow: manufacture instructions

Crossbow is a type of weapon that canused for sport shooting and for own entertainment. The principle of operation of the presented device and the bow is almost the same, however, the mechanism of launching the boom is slightly different. If in the specified weapon its movement is provided with a mechanical trigger system, then in the bow the string should be pulled by hand. In the second case, you have to put more effort.

If you can not buy weapons inthe store, you can make a homemade crossbow. Do I need to do this, everyone decides for himself. If you wanted to build your own version of the weapon, then this article will help you understand the features of the assembly process.

Homemade crossbow has an uncomplicated device,but it must be accurate. The most important element is the product bed, since the rest of the parts will be located on it. Next, you need shoulders, which will be attached to the string, the mechanism of descent, as well as a device for precise aiming.

For a bed, you must use qualitysolid solid wood. Its shape is determined by the taste of the arrow. However, in any case, the product must be done correctly. If you have a ready bed for small arms, then the creation of the presented device will be much easier.

When making a homemade crossbow, drawincreased attention to the design and processing of the bowstring, as well as the guide mechanism. Its lines should be perfectly straight and smooth. To do this, process the element on the milling machine. After grinding the guides are polished. Next from the end of the bed is mounted crosspiece with shoulders. Usually it is cast from an aluminum alloy.

Strictly opposite the groove that directs the arrow,there should be a window through which it will fly out. Shoulders are attached to the cross with screws. Also, a homemade crossbow requires a trigger.

In order to aim well, the deviceIt is necessary to equip the front and the whole. In this case, the first element must be installed significantly lower than the second. It is very convenient if the rear sight can be removed and folded, in this case there will be no problems with transportation. Although you can attach to the box and bought a sight. Such devices are installed on home-made crossbows for sport shooting.

Arrows for the device can also be madeby ourselves. To do this, just take the dural tube (with a wall thickness of 0.5 mm), and then attach the tip and tail to it. It should be remembered that the tail should not have a neckline for a bowstring, as in arrows intended for a bow.

Naturally, shooting is interesting, but verydangerous kind of entertainment. Therefore, before you make a homemade crossbow, you should think carefully. If you do it poorly, you can harm not only others, but also yourself. Therefore, either purchase a production crossbow, or try to make the weapon reliable.