None of the existing operating systemsis not immune from the occurrence of failures and errors. And Windows version 10, despite its relevance, is not an exception. And one of her problems is that sometimes Windows 10 reboots instead of shutting down. How to fix this problem using different methods, see below.
Instead of shutdown, the computer restarts (Windows 10): what's the reason?
Even specialists who know the "top ten", to be called, length and breadth, often get their hands up. The fact is that the true reason for the spontaneous reboot is still unknown.
However, most experts are inclined to believe,that this behavior of the system is connected with video cards NVIDIA (more precisely, with their drivers) and malfunctions in the operation of system components in unofficial versions of Windows.
As for drivers, the problem is thatWindows 10 reboots when turned off, you can solve them with a normal update (either in the "Device Manager" or with specialized programs like Driver Booster).
You can also try to delete all devices,connected with NVIDIA graphics adapters (monitors, card drivers) and using the "New Hardware Wizard" to re-integrate these components into the system. Everything is simple.
When the computer is turned off, it reboots. Windows 10: Enable clean boot
More complex situations are whenspontaneous reboot is associated with improper operation of some services and components. If Windows 10 restarts constantly when you shutdown, first you should pay attention to the downloading of services.
To fix the problem, use the console"Run" (Win + R), where we enter the msconfig command. Here we select the "Download" tab. In the fields below, you must deactivate all items, leaving only the minimum load line active and ticking the safe mode. We save the changes and overload the system.
Disable Auto Backup and Service Components
If the problem that Windows 10 reboots when shutdown, remains, then repeat the previous step and look at the "Startup" tab.
If it has any active services, remove the tick from all processes. But that's not all.
After that, for complete certainty, we turn totab "Services" and in the same way deactivate all the lines (you can use the "Disable all" button located at the bottom of the window). Again we overload the computer and look at the result.
Power settings
If Windows 10 reboots when shutdownagain and again, trying to change the installed power scheme. To do this, use the appropriate section in the Control Panel (in laptops you can enter it through the context menu, which is caused by right-clicking on the battery icon in the system tray).
Go to the section of setting buttons and inputpassword, where we first deactivate the requirement to enter it when exiting hibernation mode, and then uncheck the recommended startup prompt. Save the changes and try to turn off the computer.
You can use the Registry Editor(regedit in the "Run" menu), where we go down the HKLU branch through SOFTWARE and Microsoft folders to the Explorer section. In the right part, we find the CleanShutdown key, double-click the options menu and change the key value to one (the default is set to zero).
Далее открываем ветку HKLM и идем вниз по дереву to the WinLogon catalog. On the right, we find the PowerAfterShutdown key and in the same way as in the previous case, we change the key value to one. This will completely turn off the power when turning off the computer (even if the cord is inserted in the system unit or in the laptop connector).
Elimination of the problem of incompatibility of dynamic processor cycles
If all of the above methods do not help even inIf they are simultaneously used, the problem may be the incompatibility of Windows with the so-called dynamic processor cycles, whose processing is enabled by default.
To deactivate the processing, use the command line (cmd in the "Run" console), where the following is written: bcdedit / set disabledynamictick yes.
After that, we first overload the system, and thenwe try to turn off the computer in the standard way through the "Start" menu. If this service needs to be re-enabled for some reason, use the same command, but with the "no" option.
BIOS firmware issues
Finally, the problem of spontaneous rebootmay be associated with obsolete firmware primary BIOS input / output system. You can try to fix the crash by installing a new version, previously downloaded from the official developer resource, or at least resetting the settings to default values. However, this situation is extremely rare, in most cases, the above methods help.
