Reinstall the operating system oftenmeans that it is necessary to format the hard disk of your computer. Nevertheless, due to viruses and hardware failures, the process of restoring the Windows XP bootloader may be required at any time. You can reinstall the system loader without formatting the disk or losing files. Some of the main reasons for its failure are viruses, hardware failure or errors during the installation of Windows XP. Defective bootloader - is your only problem? Below is a guide on how to restore the Windows XP bootloader without reinstalling the entire operating system.
This bootloader is called the main boot.recording as well as the MBR. It controls the startup of the hard disk and allows the computer to turn on its OS. The loader offers many useful features and improvements. It also has a powerful system for controlling the device. Unfortunately, some changes in your computer or a virus can damage, change or delete it. This may affect the performance of the PC. As a result, it will either not be able to boot at all, or it will start up with problems loading certain parts of the OS. The process of repairing Windows XP bootloader can be performed using the operating system installation CD or repairing a disk.
You can restore the Windows XP bootloader by doing the following:
Turn on the computer and install the launch from the installation disk.
Start the recovery console.
Boot the computer from the installation disk to restore the boot loader Windows XP
First of all, insert the installation disk.Windows XP or a disk to restore the system to the optical drive and restart the computer. Now, in order to download the installed version of Windows, the PC will start from the CD. You need to press the necessary key when prompted, and then you need to wait for the program settings to load.
Starting Recovery Console
On the screen should appear that the programInstallation welcomes you. Press the "R" key. This will launch the recovery console in order to try to reinstall Windows XP on the computer. If an administrator password is required in the Windows XP settings, you must enter it. Then select the installation of Windows XP. Then wait until the command line appears and enter the command Fixmbr. Press the "Y" key when prompted that the FixMbr utility intends to overwrite the damaged bootloader with a new copy. After this, the Windows XP boot loader recovery procedure will be completed.
Tips for completing the process
Remove the boot disk from the drive and select"Exit" on the command line. This command may restart the PC. This will allow the computer to download the new bootloader file, and then you can continue to run Windows XP normally. It is also recommended to install antivirus software to remove viruses and protect the bootloader files so that the Windows XP bootloader recovery procedure is not needed anytime soon.
