Probably not to say that whenexcessive load on the operational and physical memory can cause unexpected failures. One of these has the designation MEMORY_MANAGEMENT (error) and is accompanied by the appearance of a “death screen”. Consider, what is the reason, how can you try to fix this unfavorable situation.
MEMORY_MANAGEMENT (Windows error): what does it mean?
Let's begin, perhaps, with consideration of the interpretation of the meaning of such failures. What the MEMORY_MANAGEMENT error means is not difficult to guess if you just translate the message displayed on the screen.
Грубо говоря, это некая проблема, возникающая в the process of memory management, its distribution, etc. The situation as a whole is rather unpleasant, since the appearance of such a message indicates the presence of some conflicts at the physical level of interaction between memory (operational and physical) and the operating system.
Causes of a malfunction
Говоря о причинах, вызывающих такой сбой, стоит note that they can be found very much. However, among the main ones, the following can be noted: virus infection, the failure of the memory lanes themselves, hard disk errors, excessive power characteristics, finally, conflicts with drivers or outdated BIOS firmware.
This is where the system gives the error MEMORY_MANAGEMENT.Let us consider each situation in somewhat more detail, and also define some universal remedies so that such failures do not recur in the future.
MEMORY_MANAGEMENT (Windows 8.1). Error: how to fix the system?
Make a reservation immediately:Such a failure can occur on any Windows system, regardless of its modification. The G8 is taken solely as an example, and all the solutions applicable here can be used quite simply in other versions.
Since the failure itself is associated with memory,The first thing you can do is scan it. It is advisable to boot the system in the so-called safe mode, then use the computer administration section called from the standard “Control Panel”.
In the list of available funds should go downdown and choose a memory check method. After that, you need to use a system reboot, during which full testing will be performed. The results of the scan will be to judge the problems. If after this the screen with the message MEMORY_MANAGEMENT fails again (error plus “screen”), there is nothing left but to change the failed memory bars. In this case, it is advisable to remove them all from the slots first, and then insert them one by one and check the operation of the computer. As soon as a failure occurs, you will determine the “flying” bar, which must be replaced.
Using the memory test program
Unfortunately, Windows’s own testing tools are often not as effective as we would like. It happens that the search for the cause of failure does not lead to anything.
Therefore, to determine the problem as accurately as possible, it is best to use the Memtest86 + utility that works much better, and it gives much more information on damage.
Updating the BIOS firmware and device drivers
Quite often, the MEMORY_MANAGEMENT error may appear in case of conflicts between the BIOS firmware and the installed drivers. What to do in this case?
First you do not need to go into the BIOS, but ratherTry to install the “native” drivers, which should be on the original disk that came with the device when you purchased it. In the extreme case, if the user has a list of devices installed in his computer, you can try to download the latest drivers from the Internet. In this case, the system should be booted from any Live CD or the Windows installation disc.
You can do even easier, if initiallyuse driver pack driver solution latest version. Its content can also be downloaded from the Internet, and then simply written to optical media on another computer terminal or laptop.
Если обновлять прошивку BIOS, тут следует быть extremely careful. First, when starting a computer or laptop, you need to enter the BIOS and determine its version and developer. Only after this firmware can be found on the Internet. But best of all, in the absence of special knowledge, not to do it yourself, but to use the services of a service center, otherwise, the hour is not even, the whole system, as they say, can be ditched.
Hard Disk Scan
Another case where the BSoD screen appearsMEMORY_MANAGEMENT (error), due to the presence of critical failures on the hard drive. It, naturally, needs to be checked. Here are just the standard means for checking that is called from the property bar of the context menu (right click on the disc letter), it will not work here (even if you enable the automatic correction parameters).
In this case, it is best to useboot disk, after starting from which you will need to call the command line. It contains the sfc / scannow command. Testing the hard drive may take a long time (it all depends on the size of the hard drive), but in the end all the failures will be eliminated, and even the load will be restored.
Change power settings
Finally, the appearance of the message with the stringMEMORY_MANAGEMENT (error) may be due to incorrect power settings. In particular, this concerns the best performance mode, which can cause too much strain on system resources.
In this case, you should go to the appropriatepartition and set, for example, a balanced mode (recommended for most computer systems) or a power saving mode. By the way, most often the failures associated with power schemes are observed on inexpensive laptops. Not only that the system itself consumes a lot of resources, but also the optimization of programs and processes causes additional load.
Conclusion
As you can see, the reasons for the failure MEMORY_MANAGEMENTmaybe quite a lot. However, as practice shows, it is the replacement of memory bars that most often suits as a solution, although some accompanying errors, for example, on hard drives or in logical partitions, can be easily resolved. It does not specifically address the effects of viruses. But as a means of checking, you can recommend some of these software products, such as Kaspersky Rescue Disk or something else. They are loaded before the start of the system itself and scan absolutely all of its elements, identifying even those threats that an ordinary scanner can miss.
Sometimes you may need to remove recentlyinstalled software - it may very well be that conflicts occur at this level. Maybe somewhere the contacts are loose or just dirty, the cables are loose, there is an undervoltage in the power supply network - what else can it be. However, in order to make a decision on the application of a particular method of correcting a situation, you must first determine the root cause.
