Despite the emergence of a number of portable media,Employees for storing large amounts of information, compact discs are still considered among the most stable and reliable in the designated group. They are less prone to causeless damage, but are not protected from physical influences and, as a result, mechanical damage. Enough a couple of scratches on the surface of the CD, so that the media stopped working correctly or read at all, "burying" a significant part of the important data for the user.
But you should not despair:The chance to fix the equipment remains. To do this, there are special commercial kits for sale and plenty of advice on the Net, designed to help restore the original state of the disk.
Prepare CD / DVD
Before removing scratches from a disk, its surface should be cleaned from dust and prints, since it was contamination that could be the root cause of a breakdown.
This can be done in several ways:
- Using non-abrasive products.
- Carefully wipe the media with a soft cloth.
- Hold under running warm water.
Shaking off the water from the CD, it needs to be dried, puttingon a paper towel not soaking. This is done in order to understand the extent of the damage: if the depth of the damage reaches the metal layer, the carrier cannot be saved by itself.
Elimination of defects on the surface of a CD / DVD
To cope with this task is possible at home, the main thing is to know how. It is easy to remove scratches from a disk, for this purpose various household means are used - from petroleum jelly to toothpaste.
Waxing with polish, car waxor another creamy texture is well suited when the polycarbonate coating has signs of severe wear. In this case, the carrier is covered with one of the following products, the excess of which is then removed with a lint-free cloth. This method will help temporarily, because it does not contribute to the removal of defects, but only fills the rubbing. After its successful use, you should make a backup of the information from the corrupted CD, the further use of which will remain in question.
The following technique (how to remove scratches from the disktoothpaste) is very simple. It consists in polishing the top layer of a CD, thinning it and thereby reducing the depth of damage. It is worth resorting to it at the very last moment, if more benign options have not worked.
It is advisable to use a baking soda paste.as the most effective. The substance is applied to a smooth fabric (a napkin for glasses is suitable) and with its help it is distributed along the scratch perpendicular to the digital tracks. This will protect the media from the emergence of new, more dangerous flaws.
In this way, it will take about 2-5 minutes to polish the disc, then gently wash the paste under warm water and allow the CD to dry in the open air on its own.
Both methods are equally effective in combating the described task (how to remove scratches from the Xbox disc).
Damage to the Xbox CD
If a defect is found on the disc for gamingconsoles should make sure that she was not the cause of the problem. The Xbox sometimes has a similar flaw, and if it was purchased recently, there is a chance that the unusable media will be replaced with a new one in technical support.
If the exchange and damages are not possible, then the main methods of how to remove scratches from the Xbox 360 disc are already described previously with the use of toothpaste or polish.
Caring for portable media
The best way to solve a problem is to prevent its occurrence. To postpone a collision with the question of how to remove scratches from a disk, it is necessary to ensure proper operating conditions for it:
- Strong pollution should be cleaned.specialized means, soft movements in the direction from the center hole to the edge of the CD. In no case can not wipe the disk surface in a circle - this creates the risk of data loss.
- Keep the media required away from direct sunlight in a folder for CD / DVD. This method will provide fragile disks with the proper level of security and will take up a minimum of space.
- Remove the media from the optical drive by holding it by the edges or the inner ring.
By following these instructions, the user will be fenced off from an unexpected loss of information and may never encounter the problem of how to remove scratches from the disk.
