During the operation of the computer canthere is not quite a pleasant situation when he does not cope with the duties assigned to him. Most of these cases are connected with the PC graphic system, and here the logical question arises: “How to install a video card on a computer?”. Replacing this particular component allows you to postpone its modernization by 2-3 years and allows you to significantly increase productivity.
At the initial stage it is necessary to decide onthe type of graphics accelerator installed and its connector on the motherboard. The first parameter will determine the range of potential candidates for the purchase. For example, a GeForse 210 video adapter is installed with 1 gigabyte of internal memory. So, you need to select a more productive device. By analogy, you can choose a GeForse 660 with 2 gigabytes of memory.
In the next step, you need to decide onconnector on the motherboard. If an AGP, PCI or ISA slot is installed, then a modular upgrade will fail, and the question of how to install a video card on a computer will be irrelevant. Computer systems of this class can not be upgraded. Components for them have long been discontinued. In such a situation, it is easier to replace the entire system unit. If a PCI-Express connector is used, modular replacement is possible, and the performance gain will be quite noticeable.
After we decided on the typeinstalled graphics accelerator, and our connector on the motherboard allows you to upgrade, you must select and buy a new video card. It is not necessary to pay attention to the most expensive video cards, since they have an astronomical price, and the performance gain will not be noticeable at all. It is recommended to pay attention to the average price range, which is in the range from 100 USD to 300 USD. These are good video cards, the resources of which are not enough for a modern PC.
The process of installing a new video adapter goes toreverse order. Before installing the video card on a computer, you need to clean everything up, especially the connector for installing this component of the computer. Carefully install the new item in the prepared place on the motherboard. In this case, the lock should work. Then fasten the locking screw. The strength of the installation is checked. Then, if necessary, additional power is supplied to the graphics accelerator. If there is no such connector in the power supply unit, it is necessary to additionally purchase an adapter, having previously checked the power supply capacity with the total indicator of the entire PC. If the computer after modernization consumes more power than the source produces, then it should also be replaced. Then the rest of the PC is assembled, the wires are connected. Then power is applied, and if everything is done correctly, the computer will start to boot. After the download is complete, you may need to install drivers. After which the PC is ready to work.
Перед тем как установить видеокарту на компьютер, you need to make sure you can and decide if you can do this work yourself. If there is any doubt, it is better to take the system unit to the service center and pay for the component replacement. And if you have confidence - you can safely get down to business!