Every PC owner ever has toto encounter such a notion as the BIOS. In this article, you will find answers to two basic questions: "BIOS, how to go?" And "What is BIOS and what is it used for?"
So, let's get started.
What is BIOS
Probably, you already guessed that the BIOS isreduction, which from English "basic input / output system" can be translated as "basic input-output system". A similar abbreviation is a program that works without the help of a hard disk. That is, it is a program that is embedded in the motherboard. If you look at all this physically, the BIOS is mounted on the motherboard in the form of a small chip, which, in turn, is written with a firmware.
BIOS works with a small battery,which is the same as the chip, is located on the motherboard. Just note the fact that the battery can eventually sit down. Any person can replace a battery, it will not be very difficult. The fact that the battery is time to change, you will understand, watching the constantly stumbling computer clock. The battery is usually located at the bottom of the motherboard. It is quite easy to remove the battery, just press it.
So, when you turn on the computer and it worksbasic function of the basic input system. It checks the computer for the availability of equipment and its operability, and if the check is successful, then the operating system starts to boot. If there are any malfunctions, the system will not boot. In this case, the computer displays a message in which all possible defects are displayed. Accordingly, to start the system, these defects must be eliminated.
With the help of BIOS you can change varioussettings of your PC. For example, only with its help it is possible to make so that the new operating system was loaded from a flash drive, instead of from a disk. In addition, in the basic input / output system, you can view the size of RAM (RAM). But if it's not necessary, then it's better to leave BIOS settings unchanged. If you install incorrect parameters, you can seriously damage your computer or even disable some of its components.
Usually, there is a need to change the settings.if you need to install a new operating system from a flash drive. For other functions, BIOS is rarely used, but you do not need to touch the settings anyway-how many things can happen.
How to log in to the BIOS?
We figured out what the BIOS is and whyit is used. Let us pass to the second question of our article. And it sounds like this: "How to get into the BIOS?". On different computers it is possible to go into it in different ways, but in most cases the input is possible with the Del key. It should be pressed at once when the computer is turned on. Usually, after the computer is plugged into the network, the name of the manufacturer of the motherboard of your PC appears on the screen, it is at this point that you should choose to press the Del key or F12.
On different computers, the procedure for logging on to BIOSdifferent. If you take the example of laptops from Sony, then here you can enter the basic input / output system with the F12 key, whereas you can usually access FOS from PCs from PCs.
In general, it all depends on what you havecomputer, and, of course, from the manufacturer of the motherboard, because the BIOS is exactly on it. In fact, the question of how to enter the BIOS is very common, which means that many people simply do not have a clue about what the BIOS is and what it's for.
In this article, we provided a detailed answer to thethe question "How to go into BIOS" and figured out what it is. It is possible that novice users will find this article useful, because the basic input-output system is an integral part of any personal computer and without it, a computer as such simply could not exist.
