How to make a fish out of rubber bands: ways, schemes and reviews. How to weave a fish on the machine from the gum

Many needlewomen know how to weave bracelets fromgum, the fish also created a few. Such a figurine can serve as a key-ring, a talisman or just an unusual decoration. In this master class we will try to make a fish on a slingshot. Make it pretty simple. On 1 figure you need 38 rezinochek.

How to weave a fish on a slingshot

Before weaving a small fish out of rubber bands on a slingshot, you need to prepare 37 yellow and 1 light green gum (choose any color you like).

The process of making fish begins with a tail:

1. Take a slingshot and wind a yellow rubber band on the right side 1 3 times.
2. Then slip 2 rubber bands on both sides of the slingshot and fold the lower ones to the center.
3. Sew 2 pieces again and drop the loops from the right and left posts. Flip the rubber from the left to the column on the right side.
4. Now pull the gum onto the post on the left side, scrolling it 3 turns.
5. Stretch a pair of rezinochek on two columns, but only remove the loops from the column on the left side.
6. Re-tension the pair of rubber bands and discard one pair from each column. On the next pair - reset all rezinochki from the posts.

We weaved the tail of the fish. How to weave a figure of a fish out of gum next? Now consistently pull on 4 pairs of rezinochek:

1. Take 2 yellow, throw on the slingshot and remove both rows under them. Repeat 3 times.
2. Drag rezinochki from a column on the left side to the right.
3. Put the hook in the loop where the fins are connected, throw 2 rezinochki, stretch through it. Pull the edges on the hook and drop these rubber bands on the post on the left side.
4. Another throw 2 pairs of rezinochek.
5. On the first two elastic bands, remove all the eyelets from the post on the left side. On the second pair - only the top 2.

We make eye fish

Now you need a light green gum for the fish's eye:

1. Slip the eraser on the right side and scroll 4 times. From above pull 2 ​​yellow elastic bands on both columns.
2. Throw off all the light green gum, and then 2 elastics from the post.
3. Flip the yellow rezinochki on a column on the right side.
4. Put the end of the hook into the same loop on the tail, slip a pair of rubber bands, stretch them and roll over the column on the left side.
5. Throw a pair of rubber bands on both posts and discard all the loops from the left.
6. On the second pair, drop 2 loops, repeat with another pair of elastics.
7. Put 1 rezinochku on the machine and drop it all the rest.
8. Tighten the eyelet. Then you can hide it.

Fish is ready! Use it to decorate a bracelet or as a key fob.

Rezinochek goldfish

Want to know how to weave a fish out of rubber bands,similar to gold? It is believed that such a figure is a strong talisman that can bring good luck to the owner. Let's make it to give good luck to yourself and your loved ones.

Before weaving a fish out of gum, you needmake 8 beige rubber bands, 16 red and 1 black. This is an option, like weaving a fish out of rubber bands on a fork. For work also need a hook. Getting Started:

1. At the first stage, take 1 red rubber band and throw it on the column on the right side, scrolling in 3 turns.
2. Then put on 3 beige elastic bands and discard the bottom red loops.
3. Slip 2 red rubber bands, discard beige. Again, throw a pair of red and discard the bottom 2.
4. Now perekinite rezinochki with a column on the left side to the right and put the hook in the loop of the three red rezinochek, located above the beige. Throw it on the post on the left side.

Make a fish eye

1. Take a black gum, throw a column on the right side, scrolling in 4 turns.
2. Throw a pair of rezinochek red, discard the gum from the column on the left side, black - from the column on the left side, another 1 pair of red - from the right column.
3. Throw 1 pair of red rubber bands and drop all the rubber bands on them from the posts.

We continue to weave the body of a goldfish

Transfer reins from the column on the left side to the right. Then we perform the following steps:

1. Take a pair of rezinochek, consisting of one beige and red. Throw a column on the left side, scrolling in 2 turns.
2. Throw the same pair without twisting, only remove the rezinochki from the column on the left side.
3. Flip the gum from the left to the column on the right side. Take again a pair of beige and red rezinochek, dangle on the left side, scrolling in 2 turns.
4. Throw the next pair on both posts, discard the loops from the post on the left side.
5. Flip a pair from the column on the left side to the right.
6. Slip a pair of rubber bands back onto the post on the left side, scrolling 2 turns. Throw another pair and discard the rezinochki from the column on the left side.
7. Now slip on 1 red rubber and discard all the loops from the posts below.
8. Throw the remaining rubber band on the hook, removing it from the slingshot, and tighten the knot, pulling one loop through the other.
9. Pull the loop on the tail.

This golden fish is so easy to trail.

How to weave a fish out of gum on the machine "Monster tail"

There is another option for creating figures fromgum. You can weave a keychain in the form of fish on the machine "Monster tail". For work, you will need: a machine, 54 primary color rezinochki (for example, take the yellow) and 2 black eye rezinochki. If you want to make fins, additionally prepare 4 rezinochki blue. This figure weaves very quickly.

We start with the tail:

1. Take a machine, put a yellow rubber band on a column on the right side of the bottom row and twist it in 3 turns.
2. Throw the second rubber band on the second column side by side, also wrapping 3 times.
3. Next, we will take 2 rezinochki. Throw a pair of gum on the right columns in the upper and lower row.
4. Slip 2 rubber bands on the two columns in the middle.
5. Take the hook and throw off the rezinochki, twisted in 3 turns.
6. Lower the gum lower, throw one more time on a pair of two right and two central columns.
7. Discard the bottom layer of gum.
8. To make a narrowing on the tail, move the rezinochki from the right column in the middle on both sides. Hold the product with your fingers so that it does not come off the machine.

The body of the fish from rezinochek

We continue the master class on how to weave a fish out of rubber bands on the Monster Tail machine.

We start to create the figure's body:

1. Throw 2 rubber bands on top, discard the lower layers. There should be 2 loops on both sides. Lower the gum as low as possible.
2. Throw 6 rubber bands in pairs, making sure that they do not twist and sit exactly on the posts, one above the other.
3. Grab the 2 lowest rezinochki and drop them from the posts.
4. Flip the top 2 gum on the column from the leftsides, 2 from the next layer - to the right. Turn the machine over and repeat all the actions on the other side. On each column should be 2 layers of elastics.
5. Take 1 yellow gum and poke ithorizontally on 3 columns of the lower row, pull back and turn the figure eight. Throw back on these 3 columns. This rubber band will connect all the loops, then there will be no holes on the body of the fish.

Fins for fish

If you want to make the fins of a fish, you can take a pair of elastics of a different color and throw them on two columns in the center. Throw 2 yellow elastics on the outer posts.

1. Using a hook, fold off the horizontal rubber band first twisted in two turns, and after that - all the rubber bands of the lower layer.
2. Slide the elastic horizontally back onto the 3 columns of the front row, but do not turn it over.
3. We continue to make the fins, throwing in the center of a pair of gum blue.
4. On the extreme columns again put 2 yellowgum. Drop the horizontal rubber first, then all the loops of the lower layer. Repeat twice, placing in the second stage in the center yellow rezinochki.

We make eye fish

For the eye, take 2 black gum: first, throw on the central column of the lower row, twisting it 3 times. Do the same thing on the opposite column.

We continue to weave a fish:

1. Throw 1 yellow elastic on 3 columns of the lower row. Then - 2 rubber bands on all the columns in pairs, as they did before.
2. Discard the horizontal gum first, then all the yellow ones below. Black do not touch yet.
3. Now you need to throw off the black rezinochki.Grab 2 loops and remove them. Throw the gum horizontally again on 3 columns, twisting it with a figure eight. Slip one rubber band on each pair of posts.
4. Discard the horizontal gum, then - all rezinochki lower layer.
5. Осталось соединить все резиночки, перекинув все loops from the extreme columns on the center. Start with the right column on the front row, then drag the elastic on the opposite column to the center. Repeat on the other side.
6. Throw rezinochku two central pillars, drop all the gum from the bottom layer.
7. It remains to make a knot, throwing the rubber from the column of the upper row down, and lower the bottom.
8. Remove the gum from the machine hook. We stretch it, tightening the eyelet.

Рыбка готова!Now you know several ways to weave a fish out of rubber bands on a machine or slingshot. It is very easy to create this figure, because you can quickly make a lot of trinkets or pendants and present them to your friends.