Как часто случается так, что в доме отключают electricity, and trips outside the city are often not accompanied by all the benefits of civilization. In these cases, there is no way to do without modern electricity generators, which make staying in the fresh air more pleasant. Under such circumstances, you can stay a few days away from a noisy city without even noticing the deprivations.
The Fubag TI 1000 is a gasolineInverter generator, which is an ideal solution for powering electrical equipment and electrical appliances for short periods of time. The device generates an alternating current with a voltage of 230 V, the maximum power of which is 1 kW. If it is a gasoline four-stroke engine, it will consume about 0.7 liters of fuel per hour. At a similar flow rate, the capacity of a conventional fuel tank will be enough for 3.7 hours of continuous operation of the inverter, while the volume of the tank can be 2.6 liters.
Reviews about the main features
Fubag TI 1000 is the equipment thatcharacterized by manual starting of the engine. This characteristic can impose certain inconveniences in working with an electric generator, but it allows to achieve an advantage in cost and weight. According to the buyers, the portable gasoline generator has an exceptional quality of the current produced, it allows you to connect to the equipment even the most sensitive to voltage fluctuations devices.
The digital mini power station is smallerand weight, compared to conventional generators of the same power. As the buyers emphasize, this circumstance makes it possible to use the generator even in hard-to-reach places, namely:
- fishing;
- in the forest;
- in campaigns;
- at carrying out of installation works;
- in premises of small area.
Noise level
Fubag TI 1000, the scheme of which will helpspecialist, operates at a low noise level, which is why this power plant is suitable for many. As practice shows, the device is low-noise and can be operated even directly near a person at any time of day. The level of generated noise is 59 dB. As users emphasize, the Fubag TI 1000 can be used to charge car batteries, because the equipment has a DC output voltage of 12V. Among other things, you can feed a variety of techniques that work under such voltage and current.
Reviews about technical characteristics
The equipment described in the article hasInverter type of the alternator, in the device 1 phase, and the current strength is 3.9 A, while the frequency of the current is 50 Hz. The manufacturer took care of the long service life and provided the equipment with air cooling of the engine. The generator has an oil level sensor, petrol is used as a fuel. At a load of 85%, fuel consumption is 0.7 l / h. If we are talking about a load of 75%, then the autonomy will be 3.7 hours. According to buyers, Fubag TI 1000 has a fairly compact dimensions, they are equal to 460x248x395 mm, but the weight with a dry tank is 14 kg.
What else is necessary to know
Extra options:presence of noise-proof casing and output of direct current in 12V. In the delivery set of the equipment there is not only the generator itself, but also a candle key, as well as an instruction manual. As additional equipment, there are sockets, power cable, plugs and protection automatons. Consumers emphasize that you do not have to worry about quality, since the equipment has certificates of conformity. In confirmation of this, it can be noted that the manufacturer gives an annual warranty for the device. In the service center during this time you can use the full range of services for maintenance and repair.
Reviews about quality and reliability
Fubag TI 1000, reviews about which often enoughonly the most positive, has a digital inverter converter, thanks to this power plant is able to produce a stable current of high quality. According to buyers, you can safely connect to it the most demanding to the quality of electricity appliances.
Потребители отмечают, что вдали от цивилизации вы can enjoy its benefits. The power plant is compact and has low weight, it copes with the role of a backup power source in the workshop and in the country. It can be located in the trunk of the car, taking advantage of the possibility of convenient movement.
User reviews about parallel connection
As practice shows, the noise levelthe station is quite insignificant, which is why it can be installed even close to the place of use, it can be a camp, a summer cottage or a construction site. The device has a reliable OHV-engine, as well as an oil level control system, thanks to which the station is ready to serve for many years. Many users appreciate the possibility of parallel connection of the station. Such equipment in the amount of two units can be connected using a special device to get higher power.
Positive feedback on performance
Inverter generator Fubag TI 1000 hassome features that make the equipment more competitive compared to peers. Among such factors, consumers note the presence of an informative panel, the possibility of convenient transportation and the presence of an additional form factor. As for the informative panel, you can use it to monitor the level of overload and the level of oil in the unit. This functionality, according to customers, allows for more careful use of the generator. Thus, it will serve the consumer of the city further without the need for repairs. With the ergonomic handle you can easily move the generator from place to place, as well as transport it. It is also important to take into account the presence of the SCHUKO 230B / 16A socket, with which you can power many devices from the generator without adapters.
Instructions for repairing the device
Fubag TI 1000, whose repair manualcan be useful to any user, provides for periodic inspection and cleaning of the air filter. It is unacceptable to use gasoline or solvents for these purposes, this is due to the fact that these substances are highly explosive and flammable. At the first stage it is necessary to unscrew the mount and remove the left cover, designed for maintenance. Next, remove the cover of the filter itself, for this you need to press the latch and remove the filter element. At the next stage, the master washes it, for this purpose he drops it into clean engine oil. Then you should tighten the elements and set back. The filter cover closes, the maintenance cover is installed, and at the last stage the screws are tightened.
Check and clean the spark plugs
Fubag TI 1000, DIY repaircan be carried out only by an experienced master, provides for periodic inspection and further cleaning of spark plugs. In order for the power plant to work stably, the spark plug must be clean, the clearance must be correct.
To check the status of this item you needremove the spark plug cap and then remove the cap of the spark plug. It is cleaned, and then unscrew the candle with a special key. The candle is inspected for damage, if the insulator is damaged, the element is replaced, the candle is cleaned. The master should check the clearance of the candle, which should lie in the range of 0.6 to 0.7 mm. If necessary, the clearance should be adjusted.
The candle is set back, it is important.eliminate distortions. The candle needs to be twisted with a key; if it is a new one, then it requires 0.5 turns. If you installed an old candle, then the revolutions can vary from 1/8 to 1/4 revolutions. The next step is to install the candle cap and close the lid. It is important to securely fix the candle, if it is poorly fixed, then the entire power plant can be damaged. Sometimes users make a mistake by using candles of inappropriate temperature conditions. The use of candles without extinguishing resistance is unacceptable.
Inspect and clean the spark arrester
After the Fubag TI generator is turned on1000, for some time it will remain hot, while it is necessary to fear burns. It will be necessary to check and clean the spark arrester, it is necessary to carry out these manipulations every 100 hours of operation. At the first stage, the screws are unscrewed and the back cover is removed. Silencer bolts should be unscrewed, removed, followed by a gasket, it should also be removed. The gasket is cleaned with a brush, it needs to be checked for burnout. If necessary, this element is replaced, and the next step is the assembly in the reverse order.
Major malfunctions and solutions
Fubag TI 1000, which you can repairself-implement, during operation may encounter some difficulties. Sometimes they are expressed in the fact that the engine does not start. It is important to check whether there is fuel in the tank, if so, then you need to make sure that there is enough oil in the device. Sometimes it happens that there is no spark in the candle, and it is replaced, and if you have not managed to solve the problem with the help of these manipulations, you should contact the service center. If the engine does not start due to the lack of fuel in the tank or insufficient amount of oil, then it is necessary to fill in the corresponding liquid. The master must check whether there is gasoline around the spark plug, otherwise the fuel may ignite and damage the equipment. If the power plant did not work, then you should contact the experts. Sometimes problems in the engine are solved by removing the candle cap and cleaning it. The candle is turned inside out and inserted into the cap. The body of the candle must be closed on the body of the power plant. Starter is pulled and checked spark.
Fubag TI 1000, инструкция по ремонту которого described in the article, can face such a nuisance, when the voltage indicator is not lit. If this happens, you should check whether the overload indicator is on, if this is the case, then you need to clarify whether the power consumers are in good condition. If the answer is negative, turn off the instruments and contact the service workshop.
