Today there are houses everywhere,lined with siding. The greatest application in the decoration of the facade of country houses was found in materials such as plastic and wooden lining, as well as vinyl and metal material.
Considering all the options for finishing the facade, you canSee these or other shortcomings and advantages of different materials. Owners of houses often stop on vinyl siding. Why are these products so popular and in demand? Let's list the advantages of socle siding from PVC.
- ease;
- strength;
- low cost;
- fire resistance;
- economy;
- non-adherence to corrosion and putrefaction;
- ecological compatibility;
- non-conductivity of electricity;
- durability;
- a variety of textures and a wide range of colors;
- simplicity in care and installation.
Advantages of metal socle siding inThe fact that the building does not need additional insulation. Walls lined with such products do not absorb moisture and withstand strong wind. There is a large selection of steel panels with a varied palette of colors.
One of the most expensive materials forThe facing of the house is siding with imitation wood. When choosing socle siding, photos of houses should be carefully examined. In companies that deal with finishing the facades of buildings, you can get a lot of ideas and imagine in advance how your house can look.
It is recommended to mount the strips perpendicularlyrows of socle siding. If the vinyl panels are screwed horizontally with screws, the lath is placed vertically. The panels are installed from the central vertical axis in the middle of the wall. Installation of siding can also be carried out from the corner of the house, in which the initial bar is set.
The most vulnerable part of the building is the basement.It is subject to the destructive effect of meltwater, the difference in temperature in the room and outdoors, and also deformation. In this regard, plastering requires renovation. Facing with a socle siding can be used for the entire building. Facade panels have a low weight; they can even decorate pipes and lanterns.
The material has the property of changing dimensions with temperature fluctuations, therefore, in the summer and at negative temperatures, a gap is left between panels and profiles.
Instruments
- screwdriver;
- roulette;
- hacksaw;
- level;
- building hair dryer;
- a hammer;
- a saw blade;
- drill.
It should also be mentioned that the panels allowsave the internal space of buildings, because under the lining they put a heater, which is also covered with a waterproofing film. When installing insulation, it is necessary to pay attention to the absence of holes in the material. Do not strongly nail the panels without leaving a gap for expansion-compression. This eliminates the wave effect.