If at the cottage or private plot you need to installhigh-quality and inexpensive fencing, the construction of corrugated board will be the best option. This material does not have a high cost, and it is easy to use in the process of building such objects.
You can build a similar fence by yourself. Before you begin, you need to consider the advice of experts. How to build a fence of corrugated with their own hands, will be discussed further.
Material Features
Studying the question of how to install a fence fromsheeting with their own hands, you should consider its features. Such a fence has many advantages. It is for this reason that the material presented is popular with the construction of fences around private territories.
The fencing of the presented type is built veryquickly. In this case, the owners of the site feel protected during the construction of such a fence. It not only hides the inner space of the courtyard from prying eyes, but is also a fairly strong structure.
Decking serves as sound insulation.He mutes the sounds that can be heard from the courtyard. At the same time installation of a fence from a professional flooring with your own hands can be done independently. You do not need to use special equipment, to call professional builders (as is the case with the construction of a concrete fence). At the same time it is possible to pick up any shade for a fence. The design will last at least 20 years. If you buy a material coated with polymer paints, the life of the fence will be even more.
Variants of constructions
How to make a fence of corrugated their own hands?This question requires consideration of the features of such fences. They may have different designs. There are solid, sectional, support and foundation fences. They differ in mounting technology. The choice depends on the needs of the owners of the site, as well as their taste preferences.
Solid barriers are closed from the outsidesupports on which they are fixed. This type of fence is the most common. It is chosen in 80% of cases. This is due to the simplicity of its construction and reliability of the design.
Also fencing can be sectional.In this case, each individual sheet will be divided by supports. The length of the section is chosen in accordance with the relief of the site. The more uneven it is, the more often it will be necessary to install supports. They are made of concrete or brick. This type of construction is used less frequently. However, this fence looks more aesthetic. When creating this type of fence you will need to make an accurate calculation of the number of materials and the length of the sections. This will reduce the amount of waste material.
Foundation and support fence
В зависимости от типа основания бывают foundation and support structures. They differ in durability and feature of installation. So, you can make a fence made of corrugated flooring with the columns with your own hands, the supports will not be connected into a single system. This is the most budget option, which is suitable for giving a fence (the design is presented below).
1 - underground part of the support;
2 - aboveground part of the profile;
3 - sand layer;
4 - a layer of cement;
5 - lags (frame);
6 - profiled.
The arrangement of the support fence does not impedenatural circulation of water and soil on the site. However, such a fence will be less reliable if its height is large. The design will not be sustainable. To build a similar type of fences will be required if the site is located on loose soils or if there is a significant slope. This type of construction is suitable for creating a partition between neighboring areas.
Foundation varieties are relatedsupport post system. They are included in the strip footing system. Such a fence will be resistant to wind load. Also, he does not allow dust and dirt from the street, which are blown under the reference type of fences from below. This option is suitable if you need to create a solid permanent fence. The work will require a lot of time and building materials.
Recommendations of specialists
Special attention should be given to the installation of relatedconcrete columns of a fence from a professional flooring. The hands of the owners of the site to create such a building can be, but you will need to take into account several nuances. If construction is planned to be carried out on soils that contain a large amount of water (loams, sandy loams), in the winter it will be possible to observe the heaving effect of the soil. When freezing such land can rise. This greatly affects the foundation.
Чтобы избежать негативных последствий, нужно resort to one of the following methods. In some cases, it will be necessary to completely remove the layer of loamy earth around the future foundation. It is replaced by sand. In order not to resort to such radical measures, you can equip the foundation below the level of soil freezing. In this case, heaving soil will put pressure on the walls of the pillars. This may cause deformation.
If the design is light, you need to warm the foundation. Heat insulation is laid around the base of the foundation. The layer should correspond to the depth of soil freezing.
Наиболее приемлемым вариантом будет установка drainage system under the foundation. It is located at a distance of about 40 cm from the base of the foundation. This allows you to remove excess moisture. When building can not neglect building codes and requirements. Otherwise, the design will be fragile and short-lived.
Uneven relief
You can collect the fence from corrugated do-it-yourselferswithout welding. This is also another reason why this type of fence is popular today. However, when building it is important to consider the surface topography. If it differs in significant height differences, it is recommended to level the ground. This can be quite a costly undertaking.
If it is not possible to level the surfacesite before the construction of the fence, you need to take into account all the irregularities when creating a plan of construction. In this case, the best option would be to install a sectional or combined fence. The foundation in this case will be stepped. It is important to accurately calculate the level of height differences and indicate the results of the measurements on the plan.
Сначала нужно замерять общий уклон поверхности.If it is not more than 35º, you can install supports at a distance of 2.5 m. With an uneven slope, the sections will be of different widths. If the total height difference is more than 35º, the distance between the sections is reduced. At the same time the tape base is applied. The upper edge of the fence should also be stepped, reflecting the configuration of the section height differences.
Tools and materials
Construction of a fence from a professional flooringcarried out using a specific set of materials and tools. They need to prepare in advance. To calculate the amount of materials, you need to create a detailed plan. Sheet corrugated sheets with a wave height of 8 to 20 mm will be required.
You also need to purchase a sufficient amountself-tapping screws. Sand, gravel, and cement mortar should be prepared. Metal elements will need to be covered with a layer of special paint. For marking used rope rubbed with colored chalk. You also need to prepare pegs.
For land works you will need a shovel.In some cases, you need to use a welding machine. You will also need a drill, screwdriver, Bulgarian, metal shears, as well as a device for rivets. The supports can be created from a shaped pipe with a cross section of 6 x 4 cm. A metal pipe with a cross section of 4 x 2 cm is used for transverse structural elements (lag)
For measurements you will need a tape measure, building level, a pencil. Also worth buying ruberoid.
Carrying out the markup
To do all the work yourself, you needto consider the technology of creating a fence made of corrugated flooring with your own hands in stages. First, the plot is marked. Along the perimeter of the future fence you need to drive pegs. Between them stretch a rope or cord. Next, conduct measurements of the distance and angle of the terrain. This allows you to calculate the number of spans and their location.
Where the supports will be mounted, you also need to drive pegs. The gate location must also be marked when marking. It is best if the distance between the posts corresponds to the width of the sheet.
If the foundation will be tape and step, set the mark on each level difference. Tags must be placed at the beginning and at the end of each section, taking into account the features of the relief.
Design
Creating a fence from a professional flooring with handsfoundation or on supports, you need to develop a detailed plan and draw a sketch. The created markup is measured. On the plan you need to put columns, the distance between them, as well as information about the slope of the soil. If along the fence there are intolerable obstacles (for example, electric poles, pipeline), they are also marked on the plan.
После этого выбирают тип конструкции ограждения.The calculation of the amount and type of materials not only corrugated, but also support pillars, the foundation is done. You should also calculate the number of fasteners and materials for finishing the pillars. If necessary, create a combined type of fence. This will give the structure stability and durability.
Mounting of profile supports
Before installation, you also need to consideroptions for how to put the fence out of corrugated their own hands. It should be noted that such a fence does not have a lot of weight, and therefore does not exert significant pressure on the soil. However, the material when creating large spans will have a windage in wind gusts. Therefore, supports must be reliable.
As racks, you can use a profiled pipe, wooden, reinforced concrete pillars, masonry structures or on piles. The technology of their installation depends on the choice of materials.
To create supports of profiled pipe you needdig holes in the places of installation of the pillars. They should be 1–1.5 m deep and 20–40 cm in diameter. A simple ratio should be maintained: 65% of the column above the ground and 35% in the ground. Supports set on the markup. Their position is controlled by the tensioned cord and building level. After this, the edges of the pits are laid out with roofing paper, the supports are poured with concrete to a depth of 1 m.
Installation of wooden columns, concrete
By studying technology, how to make a fence ofsheeting with their own hands, you need to consider the installation of a different type of support. If reinforced concrete or wood supports are used, the installation technique almost completely repeats the installation of supports from a metal profile. However, it is worth considering a few nuances. Wooden racks are less durable. They are covered with special antiseptic compounds and varnish.
Reinforced concrete pillars are distinguished by their mounting complexity. They require the arrangement of the strip foundation because of its large weight.
Brick supports
A fence made of corrugated board can bemounted on brick supports. To do this, you also need to build a strip foundation. At arrangement of the basis it is necessary to lay a waterproofing layer. Sand, crushed stone are poured into the prepared hole, they line the waterproofing layer. Then a profile pipe is installed in the center, around which the brickwork is erected.
Completion of installation
The fence from a professional flooring is mounted on the handsground and additionally strengthened transverse lags. They are installed in parallel. In this case, welding is used. If the fence height of 1.7 m, you need to install two rows of lag. For higher fences you need to install three rows of crossbars. They need to be painted.
Можно применять для монтажа вместо сварки хомуты, brackets, brackets. Further, with the help of screws, sheets of corrugated sheet are fixed onto the prepared frame. Above you need to set the U-shaped profile. It allows you to give a complete look design.
Having considered how to build a fence of corrugated flooring with your own hands, you can create a strong durable fence.
