Aquilon made of galvanized steel with a polymercoating is a decorative bar, which has the appearance of two corners nested inside each other. It is designed for aquilon decorative trim of the otkostnogo space, it carries an equalizing function. Installation is carried out in conjunction with a slatted strip. With the help of this element, it is possible to hide minor unevenness of the slopes, which do not exceed 3 cm, this is true if it is a standard aquiline.
Appointment
Aquilon made of galvanized steel with a polymercoating - a bar, which is used in the installation of slopes. An element is made of a single piece of sheet metal and serves as a clothespin, where the edge of the slope is clamped. This design provides the rigidity of the element, and also guarantees the most dense clamping of the slope near the window frame. The bar is mounted directly on the frame using self-tapping screws. The slope is located in the gap and is located between two corners of the aquilon, with no additional fasteners, on the other hand the element is fixed to the facade.
Advantages of installation system
When installed aquilon from galvanizedsteel with a polymer coating, during which the above method is used, then you can count on the fact that the fasteners elements will be decorated with a slope, this makes the opening complete and attractive. If it is not possible to fix the aquilon from the edge of the window, then it should be deployed and secured from the back side, however in this case the fasteners will be visible. Due to the fact that the width of the aquilon shelf is 20 mm or more, it is possible to reduce the amount of work that is associated with fitting the slope under the angle of the facade with respect to the window frame. Aquilon is made in the same color as the slope, so it merges with the opening and creates an unsurpassed style of framing the door and window.
Advantages of using Aquillon
Aquilon made of galvanized steel with a polymercoating has high rigidity, this ensures the tightness of the attachment of the slope to the surface of the facade. After installing this element, you can be sure that there will not be atmospheric precipitation under the bar. When implementing fasteners, there will be a minimum number of visible elements. If you fix the aquilon on the edge of the opening there is no possibility, then it is unfolded and attached on the opposite side. Akvilon has a fairly wide shelf, this eliminates the need to adjust the slope.
Mounting recommendations
Along with the aquiline in the design of openingswindows are used, as well as dewatering, which are made of galvanized steel. At the same time in the role of fasteners are steel brackets, the distance between which can be from 900 to 1000 mm. They are fixed on the wall with the help of dowel-nails, the dimensions of which are 80x8 mm. When the windows are finished, it is important to analyze the position of the element with the help of the building level before the final fastening and installation of the guide.
The next step is to connect to thebrackets, and use self-tapping screws. Under the escarpment slats can be placed fiberglass or basalt insulation, the thickness of which will be provided by the design decision. On top of the layer of thermal insulation, a vapor-permeable membrane can be placed, which will protect the heater against the ingress of rain water. Among other things, the material will not be blown out by the wind. Finishing of windows provides laying on the thermal insulation of the slat, while it is important to leave a small ventilation gap, which should be located in the upper part of the lining.
Cost
If you want to improve the window opening with a baraquilon, you should first get acquainted with the prices for this product. Thus, a three-meter aquilon will cost 225 rubles. a piece. But if you buy an item from an authorized dealer, the price can be reduced to 180 rubles. Some companies sell aquilon, indicating the cost per running meter. One of them is "Gelmarus", to acquire a window lath in which it is possible for 50 rubles. per running meter. The window opening can be trimmed with a bar that is made in imitation wood. The standard length of this element is 2 m, and the unit price is 216 rubles.
Calculation of the required amount of material
Aquilon, whose price is considered acceptable,is calculated before purchase. In order to find out how much it will take to decorate the opening, it is necessary to add the lengths of the side slopes and the upper part of the opening. From below this bar is not set, because there will be a low tide. If the latter is not provided for by the project, then the lower length of the window opening must also be summed up.
When performing calculations, you must add 6 cmon each side of the window, these centimeters will go to the undercut when docking corners. If you buy zinc-coated aquilon, then you should take into account that when calculating the material, it must be remembered that a solid siding panel should be installed on each side of the opening. This is due to the fact that trimming at docking will not look so attractive, and windows - this is the first thing that falls when looking at the facade.
Recommendations of a specialist
When installing the aquilon, you should remember that,that the material is able to contract in the cold season, but with increasing temperature it expands. When the installation is carried out at a lower temperature, the clearance should be about 10 mm, whereas in the warm season the gap size varies from 6 to 9 mm. Self-tapping for the same reason is not very tight. The gap between the hat and the panel should be about 1 mm.
Conclusion
It should be remembered that the installation of aquilon,which is also called okolokonnoy bar, is not always justified. For this reason, on the individually taken object, provision should be made for the accessories, which are used for mounting the vinyl siding.
