Murol is a drainage system made of PVC. Features, benefits and installation

Almost all modern buildings are equippedGutter system, which sends rainwater from the roof to a certain place. Previously, tin pipes and guides were used for these purposes, but since 2006, the products of the Canadian manufacturer Murol have appeared on the domestic market. The drainage system of this manufacturer quickly gained popularity among consumers due to its low cost, excellent performance and noiselessness. Let's look at the features of such gutters and how easy they are to install.

Characteristics

Murol drainage system is presented in the form of various elements made of light and heavy-duty plastic, which eliminates the additional load on the cornice.

Each part of the drainage is thought out so competently that even on the roofs of the most complex geometry, the products are installed very easily.

Murol (drainage system) includes the following elements:

1. Chutes with a diameter of 13 cm. Their length can be 3 and 4 meters.

2. Universal plastic and metal connectors.

3. Central (transitional) and end (universal) funnels.

4. Special plugs that seal the ends of the chutes sealed.

5. Various angular adapters.

6. Pipes for draining water from the roof. They are made 3 and 4 meters long. The set also includes fasteners, which ensure reliable fixation of pipes against the wall.

7. Couplings for connecting pipes.

8. Pipes at an angle of 67 degrees (bends).

9. A set of fasteners made of galvanized steel.

The manufacturer produces gutters for the roof of white, brown, black and red, so that the assembled system perfectly harmonizes with any roofing.

Advantages and disadvantages of Canadian products

Murol (drainage system) is characterized by the following positive qualities:

• Operating time. The service life of all drainage elements is more than 50 years. It is very important that during this time the plastic retains its original appearance.

• Resistance to atmospheric effects. Roof gutters (of this series) are capable of withstanding temperature fluctuations from +50 to -50 degrees.

• Ease of installation. Slight weight and the availability of convenient latches facilitate fast and easy installation of drainage systems.

• Noiselessness. Plastic elements help to reduce the noise level during the rain.

The drawbacks are the loss of color (inresult of long-term exposure to ultraviolet rays) and a large number of counterfeits on the market. The first property is inherent in absolutely all products made of PVC, but with the second drawback you can cope by buying only certified products.

Mounting technology

Installation of plastic drainage can beis done by one's own hands, for this it is easy enough to understand how correctly the downpipe system Murol is installed. Installation is carried out in several stages:

1.For the beginning fixing elements are established, intended for fixing gutters (hooks). If in the process of using brackets made of plastic, the distance between them should not exceed 45 cm. Metal hooks can be mounted in 60 cm increments. In places where the funnel is to be installed, two fasteners should be installed, so that they are located on both sides pipes.

2. Hooks should be installed with a slope towards the funnel. Through each meter of the roof the slope increases by 3 mm.

3. After installation, the funnels begin to assemble the gutters. They are connected together by means of latches and special connectors.

4. Next, the installation of the angular components of the drainage (in places where the direction of the troughs is changing). On the free edges are installed plugs.

5. On the wall of the house there are points in the area where the pipe clamps will be fastened.

6. Downpipes are inserted into each funnel. With a step of 2 meters, clamps are mounted. Pipe joints are snapped and fixed with clamps.

The installation is completed by installing a rainwater intake or a tap.

As you can see, the installation of the Murol (drainage system) is extremely simple.

The cost of drainage Murol

Surely many people have already asked themselves,how much is the drainage system Murol. The price of the complete set depends on such factors as the roof area, the height of the building, the required number of additional elements and the reliability of the manufacturer. On average, each running meter of the system will cost the buyer 600 rubles.