/ / Sticky wallpaper for painting. How to glue non-woven and fiberglass wallpaper?

Wallpapering under the painting. How to glue non-woven and fiberglass wallpaper?

Marburg structural wallpaper for painting - brightan outstanding type of wallpaper among the entire range of finishing materials. A feature of them is a combination of positive characteristics of traditional roll wallpaper and the possibility of painting with emulsion or acrylic paint.

Wall Sticker

They are suitable for gluing both walls and ceiling.Having pasted such wallpaper once, you can not think about selecting and buying new ones, when it becomes necessary to do repairs. They can be repainted more than once.

The main advantage of the structural wallpaper is a wide selection of materials of different textures (relief patterns) that can be painted in different techniques.

Today we will try to understand the intricacies of the choice of material and understand how the wallpaper is glued for painting.

Wallpaper for painting: species diversity

Structural wallpaper is divided into three groups:

  • duplex paper;
  • non-woven fleece;
  • glass fabric wallpaper.

Choose wallpaper for painting

Их легко отличить по цвету – они всегда белые и deep relief texture. Structural wallpaper is durable. They withstand a large number of repaints, while retaining their aesthetic appearance. The optimal number of updates for paper wallpaper for painting (cheap) - up to 7, non-woven - up to 15, glass coverings - up to 20. Service life - up to 30 years.

Structural wallpaper Marburg perfectly disguisethe unevenness of the walls, which at a low price for the finishing material makes them the preferred choice. Expensive wallpaper with a beautiful pattern in recent years, choose only those who are going to do home design repair.

Features of paper wallpapers

Paper structural wallpaper consists of two layers:The first - paper, the second - with a special water-repellent impregnation, which increases the wear resistance of the material. In addition, the waterproof layer allows you to do a wet cleaning of the walls covered with them.

Features of non-woven wallpaper

Non-woven wallpaper show a high leveladhesion to the surface that they cover, which not only makes it possible to hide the defects of the walls, but also to give them additional strength. At the heart of the fabric of such wallpaper is non-woven, on top of which a foamed vinyl cover with perforations is applied. This coating differs plasticity, so the wallpapering on the wall is practically devoid of significant drawbacks. It is used for finishing new buildings and houses, which can eventually shrink. The non-woven layer will not only not break, but also will not allow the cracks to spread.

Paper-based wallpaper

Features of fiberglass wallpaper

Основа третьего вида структурных обоев сделана из and for the top layer glass fiber is used (it is made of quartz sand with addition of different impregnations). Hence the name - glass wallpaper or fabric wallpaper.

Tissues call them because of the possibility of imitationTextile texture: "canvas", "matting", "spider". The distinctive characteristics of glass coverings include high moisture resistance, fireproof properties, increased strength, wear resistance. This is the best option for finishing office and public premises, cafes, hotels and boutiques.

How much the wallpaper is dry after painting

Important! Fiberglass in combination with non-woven base is excellent for strengthening walls and partitions, constructed from foam blocks or plasterboard.

Generalized rules of pasting

  1. Even if you do not need to finish the ceiling, finish all the preparatory work of the surface (plaster, primer, paint) even before the walls are finished.
  2. Стены перед оклеиванием обязательно подготовьте:New walls plastered and primruntuyte, the old (from which the wallpaper is removed) - it is enough to progruntovat. It can be started only after 24 hours, when the primer is completely dry.
  3. Open paper wallpaper sheets withstock up to 5 cm from below and from above. Non-woven wallpaper can not always be cut, and wallpaper based on fiberglass is glued to the wall with unwinding the roll, and then cut.
  4. The consistency of the wallpaper glue for duplex paper wallpaper should be thicker than for simplex paper. Preparing the adhesive composition is necessary, strictly following the instructions.
  5. Too liquid glue will soak and soften the wallpaper, making them more vulnerable. In addition, heavy cloths can not be kept on the wall and fall off.
  6. Flizelinovye and wallpaper based on fiberglass are glued to a special glue.
  7. Since the wallpaper is glued to butt, the work starts from the corner from left to right. Since the wallpaper sheets are dense, the overlap will look unaesthetic, especially after painting.
  8. Punching corners should be given special attention. When making corners, the strip of wallpaper is glued so that it only comes a little to the side of the next corner.
  9. The next cloth is glued.Applying wallpaper to the wall, draw a vertical strip of marking in the middle of a double layer of wallpaper. Armed with a ruler and a clerical knife and cut the wallpaper on this strip, removing the trimming and smoothing the joint.
  10. Having finished the work, the places of joints of the walls with the ceiling and the floor, if desired, can be decorated with a plinth and a baguette that perform not only a decorative function, but also help to seal joints.

Technology of pasting paper wallpaper

Working with two-layer wallpaper is no differentfrom pasting conventional paper. Having smeared the canvas, fold it with an accordion and let it be covered with glue, postponing it for a few minutes. While waiting, you can spread the next piece of wallpaper with glue.

When the wallpaper is soaked with glue, unfold them andstick on the wall. Do not forget to smooth the canvas on the surface using a wallpaper brush, roller or gauze cloth. Cut the remnants of wallpaper with a construction or office knife when dry.

Many ask:“How much dry wallpaper for painting after sticking?” And the experts have the answer to this question. It all depends on the amount of adhesive applied, but it takes at least 24 hours to dry completely.

Best wallpapers for painting

Consider that when handling paper wallpaper,care must be taken: they may stretch, bubble or tear from an excess of glue, sometimes when gluing too wet a sheet of paper wallpaper loses relief. This is due to the fact that the wallpaper on a paper basis is very delicate.

The technology of pasting non-woven wallpaper

Flizelinovye - the best wallpaper for painting.This process is different from the previous one, and in comparison with other techniques it has distinctive characteristics. The flaws that are present in working with paper non-woven wallpapers are absent: they do not bubble, do not tear and do not deform.

Wall Sticker

Thin non-woven wallpaper cut into strips,smeared with glue, leave to be filled with them. Sometimes the wallpaper and wall are coated with glue, but most often this need is no longer necessary, and only the surface of the wall is covered with glue.

Sticking wallpaper for painting (non-woven) looks like this:

  1. Glue the coat section of the wall a little more than the width of the wallpaper wallpaper.
  2. The wallpaper is rolled out from the roll and pasted on the wall.Pressing with a rubber spatula, cut along the line of plinth. With this technique of sticking, there is usually no need to smooth out the wallpaper: they themselves fit well on a flat vertical surface.

Glazing technology

Getting started, plaster the walls with a colorless latex primer, as the wallpaper based on fiberglass is quite transparent.

Wallpapering for painting

Способ оклеивания стен напоминает технологию finishing non-woven wallpaper. The only thing that is different is glue. For glass wall mills, you need to buy a special adhesive compound designed for heavy types of web.

After gluing, when the glass cloth wallpaper is dry, they are additionally covered with a layer of glue, on top of which paint is applied.

Important! It is possible to paint fiberglass only after complete drying of the primer layer.

Wallpapering for painting involves the use of a special water-dispersion or latex paint. Using the color scheme, it can be painted in any color.

Marburg Wallpaper

Compared with other types of wallpaper wallthe coating based on fiberglass has high strength characteristics. Walls with such a finish are not afraid of any scratches or other mechanical damage. In addition, these wallpapers can be washed with a brush with detergent, without fear of spoiling them.

Sticking wallpaper for painting is not only practical and economical. It is easy to work with such finishing material, and it is possible to apply paint in any technique, which makes it possible to roam the imagination.