Многие владельцы участков под застройку ponder the question of how to build a house for permanent residence. There are a lot of options for solving this problem, the main thing is to choose the material that will provide comfortable conditions for living. In addition, it should be convenient to work with him, and it should not cost too much.
It is very important to lay the foundation of the walls of the product, whichwill be distinguished by a long service life, and will also have the ability to retain heat. For example, houses from a bar, the price of which is quite reasonable, just have such characteristics. A big plus would be if the walls after construction will not need finishing.
Construction of wood walls
Wooden houses a person builds, perhaps, onthroughout its existence. But even today this material has not lost its attractiveness in terms of durability and thermal insulation qualities. The walls of wood have the ability to breathe, these buildings look very attractive and do not look the same type compared to other buildings.
У деревянного дома много преимуществ.First of all, the building will not have significant weight, which indicates an opportunity to save by abandoning the foundation of a deep foundation. Wooden houses are distinguished by the fact that they are based on natural material that is as environmentally friendly as possible and does not bring harm to health. You can start building such housing at any time of the year, and the work will be completed in a short time, which is especially noticeable when compared with the duration of the process of building a house from any other material. You can assemble a log house yourself by ordering material from a professional company. Logs ready for assembly will be brought to the construction site.
The cost of a wooden house
You can call in such a house right afterconstruction, and finishing work is recommended not to perform during the first years of shrinkage. Many do not do this at all during the period of the house’s life, as the walls of wood look very attractive from the inside and outside. Houses from a bar, the price of which, depending on the area is different, can be ordered from the company-developer. So, the house, whose effective area is equal to 63 m2worth 385,000 rubles.
Brick walls
Although the wood is soattractive material for the walls of the house is the most common today brick. Drawings brick houses, which are presented in the article, it is necessary to make up before the start of construction. Such buildings are durable, and architectural solutions can be mass. Such houses do not so well cope with the retention of heat in the internal space of the premises, however, during the construction process, you can apply some masonry techniques that will increase the insulating characteristics of the walls. For example, it may be a well laying, which presupposes the formation of a double wall, whereas a heater is poured into the free space between the walls.
The foundation for a brick house
The construction of brick houses suggeststhe construction of a deep foundation, which will make the work more costly. But in this case, one cannot do without a proper foundation, because the building will be very heavy. The process of building such a house takes a long time, since it is necessary to use a mortar, as well as concrete, for which to build strength, a period of about a month is needed. The cost of the entire building will be more expensive compared to those using other products.
Making walls of reinforced concrete panels
Many, wondering whatto build a house for permanent residence, decide to use reinforced concrete panels. At the same time, there are some advantages, among them it is possible to select the opportunity to complete construction in a short time, which in most cases is limited to two weeks. As soon as the erection of the walls is completed, you can immediately begin external finishing work, which also attracts consumers.
Sandwich Walls
To create their own private homes, not manyuse sandwich panels today, but in vain. These products are a pair of wooden plates, which are sometimes replaced with plywood or boards. In tandem with panels, a wooden frame is used, which acts as a base, whereas a heat insulator is covered in the space between the walls. Such sandwich panels are produced in the factory, where typical projects are applied. This indicates that the buildings on their basis are monotonous, but very warm. In addition, to build houses on this technology is simple, because the dimensions are calculated to the millimeter. And you can produce work without attracting qualified craftsmen. It is permissible to proceed to the decoration of the walls after the completion of the construction works.
You can not be afraid that built on suchthe method of the wall will be affected by water or insects, because the material undergoes special chemical treatment at the plant. This, among other things, allows to obtain walls that are protected from fire. The service life of such houses is equivalent to that shown by wooden houses.
Lightweight concrete walls
If you still haven't decided where to build the housefor permanent residence, some experts advise the use of lightweight concrete blocks. They can be standard sizes or customized. You can choose those products that are more suitable for you on the quality characteristics, the latter of them are determined by the placeholder. Thus, Portland cement is certainly used as a base, while slag or expanded clay can be used as an additive. As a result, slag concrete or expanded clay concrete is obtained. Cast such material can not only in the form to get the blocks, but also in the formwork, which in the latter case allows you to create a monolithic slab. Houses from blocks turn out inexpensive and high-quality.
At the heart of the walls may be another lightweight concretewhich is enclosed in a foam block. This material is affordable, which reduces the cost of construction by 3 times. It is convenient to use such concrete in work as it has insignificant weight. In addition, such products have a cellular structure that provides better heat resistance. If necessary, the block can be quite easily cut.
Gas block construction
Reflecting on what to build a house forpermanent residence, you can choose aerated concrete. The complexity of its use is much less than in the case of bricks. The houses are light and warm. Much less money is spent on heating resources, which allows saving. You can save already at the construction stage, because one gazoblok by volume is equal to 16 bricks. At the same time its weight is insignificant, which allows you to complete the work in a much shorter time. In addition, aerated concrete products do not exert significant pressure on the base of the house, this indicates that there is no need to make the foundation recessed.
Residential homes from this material possessheat capacity, if only to avoid cold bridges when laying. This can be achieved through the use of special glue, which allows for thin seams. If you use a traditional solution, the thickness of the seam will be increased to 22 mm, and you can save only at the construction stage, which is not the case for the period of operation of the house, because if you have walls with cold bridges, you will have to insulate them, and the rooms behind them will be heated more.
Characteristics of aerated concrete
Houses of blocks should be built with a specialcaution, because the more impressive the heat-saving characteristics of the product, the more pores the material has, and they make it not as durable as we would like. Aerated concrete can be trimmed inside and out as you wish, this will allow you to get a building that has unique aesthetic and architectural features.
Are you choosing blocks for your home? Which is better to buy?Experts recommend choosing those products that have ideal geometric shapes, this will facilitate the construction process and make it faster. In addition, due to the irregularities of the blocks, there will be no waste of adhesive composition. Quite often, the owners of future houses resort to solving the independent production of lightweight concrete; this is advisable only if it is possible to rent the appropriate equipment inexpensively, because in the absence of the necessary tools, light concrete will turn out to be too expensive.
Construction of brick houses today is veryIt is common, but consumers often incline to other materials described above. If you intend to engage in the construction of your home, you should consider the characteristics and features of working with other materials.
