Soil enamel on rust 3 in 1 representsanti-corrosion mixture that performs conversion processes and protects and decorates the surface. Such compositions are intended for finishing painting metal surfaces that have a clean base or are covered with rust. The application can be made under weather-resistant finishing enamels, becoming part of complex coating systems.
Specifications
Soil enamel on rust 3 in 1 is a suspensionanti-corrosion fillers and pigments that dissolve in alkyne-modified varnish. In the production process, target substances and organic components are added. It is possible to apply the mixture on the elements of industrial equipment, building structures, parts of garages, storage rooms, gates, hangars, doors, cover canopies, wrought-iron furniture, grilles and decorative fences.
After applying the mixture dries quickly, formingeven and durable coating that is highly resistant to corrosive processes and atmospheric phenomena. Coating without harm to quality can affect oil, technical oils, ethyl alcohol and diesel fuel. 3 in 1 rust-enamel can cope with the effects of sea and fresh water, as well as gasoline and weak acids.
With this product you can simplifypreparation of the basis before carrying out coloring. The mixture reduces the cost of the formation of a corrosion-resistant coating, not suggesting the need to combat strongly associated with rust. Priming is not required before use. Soil enamel on rust 3 in 1 creates a coating system that, in a temperate and cold climate, is capable of maintaining its protective qualities for 8 years. This is true when applying two layers of composition.
Reviews of primer-enamel "Novbythim"
If you decide to choose to workprimer enamel on rust 3 in 1 "Novbythim", then you should read the reviews. Consumers emphasize that the application of the composition can be made on metal surfaces with rust, which holds quite well. Its thickness can reach 100 microns.
Simplify staining can be usingpneumatic spray, because it combines the functions of decorative enamel, rust converter and anti-corrosion composition. Buyers choose this material also for the reason that it can be used to paint surfaces whose rust removal is difficult for many reasons. Among them are impressive area of the product, lack of time and complexity of the profile.
Positive characteristics
Soil enamel on rust 3 in 1 "Novbythim"different elasticity and resistance to frequent and sudden temperature changes. The surface can be operated with a range that varies from -45 to +100 degrees. After applying the surface is protected from the development of corrosion. Work is simplified by the fact that the mixture adheres perfectly to the surface and does not imply the additional use of a primer.
Soil enamel on rust 3 in 1, reviews of whichpresented in the article, can be applied by spraying, which allows to speed up the work, as well as to make them less labor intensive. Before carrying out these manipulations, the mixture should be diluted to the desired consistency. It should be noted, and a slight expense, which maintains excellent hiding power. Painting works can be carried out at sub-zero ambient temperatures, but the thermometer should not fall below -10 degrees.
Description and characteristics of Prestige priming enamel
Soil enamel on rust 3 in 1 "Prestige" canused for painting products that will be used in difficult atmospheric conditions. It is allowed to use this mixture to paint the internal surfaces of car parts that have been exposed to rust. However, you should be guided by some restrictions when using primer-enamel. Among them is the lack of the ability to paint surfaces that will heat up during operation. This recommendation applies to the interior of the premises, due to the possibility of an unpleasant smell. This composition should not be used for the treatment of surfaces that have been painted with materials made on a nitro base. This may cause the coating to swell.
Soil enamel on rust 3 in 1, technicalthe characteristics of which are presented in the article should not be applied to flaking as well as expanded coatings. Such formations must be removed before starting the process. If there is a need to get rid of the paintwork, you should use a remover.
Mode of application
Before you start using primer enamel,it needs to be mixed well. The surface is freed from dirt, dust, exfoliating coatings, as well as rust, which has found a state of friability. The surface must first be degreased. If the base or products were painted with oil or alkyd paints, then it is necessary to perform a stripping to a dull condition. It is unacceptable to carry out the application when the ambient temperature has risen above +30 degrees. Between coats must be kept for one hour or more. As for the time of complete drying, this period lasts 2 hours.
Conclusion
Over the enamel primer, which passed the drying stage,It is possible to carry out the application of a water-dispersion composition. Dilution can be done with solvent No. 1 or xylene until the composition has the required viscosity. It is worth noting that using the sprayer when painting will speed up the work, but you need to think about whether to purchase the appropriate equipment or rent it.
