/ / Welding electrodes "Monolith": characteristics and reviews

Welding electrodes "Monolith": characteristics and reviews

The Russian company Monolit produceselectrodes of various types. To date, there are models with cellulosic as well as rutile coating. For arc welding, they are ideal. The diameter of the model is different. It is also important to note that some brands are used to work with carbon steel.

If we talk about parameters, then the nominalthe voltage of the electrodes is on the average 50 V. Deviation in this case is allowed in 5 V. Electrodes are sold in small and large packages. On average, a pack of 2.5 kg will cost the consumer 600 rubles.

electrodes monolith technical characteristics

"Monolith of the RC"

Electrodes are suitable for butt joints"Monolith of the RC". Their characteristics are as follows: a temporary resistance of 340 N per square meter. mm, the minimum angle of inclination is 35 degrees. It is also important to note that in this case a rutile coating is used. The maximum angle of the electrode is 70 degrees.

If you believe the opinion of specialists, the expenditure of thisbrand insignificant. The diameter of this electrode is 3 mm. Its relative elongation is at the level of 22%. The sensitivity to contamination of the brand is insignificant. It is also important to mention the high deposition rate. Electrodes can be used to work with the pipeline. They are sold in packs of 1 kg, and ask for them about 340 rubles.

electrodes monolith characteristics

Comments about ANO-4

These electrodes are "Monolith" reviews frombuyers get good. This grade is often used for working with carbon steel. For surfacing it can also be applied. The consumption of the weld metal in this case is low. The maximum deviation of the nominal voltage with reverse polarity is equal to 5.5 V.

Coefficient of surfacing at electrodes does not exceed 6However, they still have flaws. First of all, this concerns high sensitivity to rust. Also consider the small angle of the electrode. To work with the pipeline, this mark is not allowed to be used. You can buy electrodes in packs of 1.5 kg for 450 rubles.

Characteristics of electrodes "ANO-4i"

These electrodes "Monolith" technicalcharacteristics have the following: an elongation of 23%, and a temporary resistance of 350 N per square meter. mm. The diameter of the presented stamp is 3 mm. The minimum angle of inclination of the electrode is 30 g. In this case, a rutile coating is used. Its thickness is 1.2 mm. Ceiling with the help of the presented brand is good. The maximum deviation of the rated voltage does not exceed 7 V.

monolith electrodes

The opinion about "АНО-6"

These electrodes are "Monolith" (manufacturer -Russia) are designed for arc welding. With carbon steel, the brand handles perfectly. If we talk about the parameters of the product, it is important to note that the diameter is 3 mm. For surfacing these electrodes are rarely used. Work welder is able in any position. The parameter of temporary fracture resistance does not exceed 50 MPa. For structural steel, electrodes can be used. They use a mixed coating.

Of the disadvantages, it is important to mention the strongsplashing. If you believe the reviews of buyers, then for vertical welding, the brand fits well. Heat resistant steel is allowed to work. However, the consumption of weld metal at the electrodes is very significant. The nominal voltage of the mark with reverse polarity is 52 V. Ceiling seam with the help of electrodes is obtained excellent. It is also important to note a slight deviation of the nominal voltage with reverse polarity. This figure reaches a maximum of 4.5 V. These electrodes are sold for welding "Monolith", as a rule, in packages of 1 kg. On the market for them on average ask from 250 rubles.

monolith monolith pc characteristic

Description of the model "МР-3"

Presented electrodes are intended forarc welding. In some cases, they are used to work with carbon steel. According to customer reviews, they are ideal for surfacing. However, the parameter of temporary rupture resistance is insignificant. In this case, splashing is allowed slightly. For structural steel, the grade may be used.

The admissibility of overheating of the electrodes is inlimits of normal. For heat resistant steel is not allowed to use them. If you believe the experts' opinion, this brand stands out for a large indicator of the rated voltage at 45 V. You can buy the welding electrodes "Monolith" in packages of 2.5 kg, and they cost about 550 rubles.

Parameters "ANO-36"

Said electrodes "Monolith" characteristicshave the following: diameter 3 mm, consumption - 1 kg of product per 1.7 kg of metal, deposition rate 9 g. In this case, the maximum deviation of the nominal voltage does not exceed 4.5 V. The coating thickness is 1.2 mm. The nominal voltage with reverse polarity is 55 V. To work with the pipeline, these electrodes are not allowed to be used.

If you believe customer reviews, the ceilingthe seam with their help turns out excellent. For DC operation, they can be used. However, thick metal is not allowed for welding. While working with structural steel, splashing is quite large. It is also important to mention the sensitivity of the brand to rust. You can buy electrodes for the price of 500 rubles.

Reviews the brand "ANO-21"

Said electrodes "Monolith" for surfacingfit perfect. However, they are limited by the angle of inclination. In this case, a slight sensitivity to rust allows you to work with structural steel. For arc welding, the mark is often used. Sensitivity to pollution is, however, it does not interfere with working with heat-resistant steel. According to customer feedback, it’s better not to use electrodes for overlapping connections.

Maximum deviation with reverse polarityequal to 5.5 V. The thickness of the coating in this case is 1 mm. The operating voltage at constant current is 50 V. The consumption rate of the electrodes is negligible. If you believe the reviews of buyers, then the slag flowing forward in the arc should beware. It is possible to buy these electrodes "Monolith" at a price of 350 rubles. per pack of 1.5 kg.

welding electrodes monolith

Reviews the brand "UONI-13/45"

Many buyers give positive comments about theseelectrodes. First of all, it is important to note the low sensitivity to rust. In this case, spraying is ensured by a small. For welding short arc "Monolith" electrodes are used frequently. They are not sensitive to rust, so it is allowed to work with structural steel. For overlapping connections, electrodes are often used. Their consumption is about 1 kg per 1.56 kg of metal. The deposition rate does not exceed 8 g. In turn, the nominal voltage with reverse polarity is 55 V.

Coverage in this case is provided mixedtype The maximum deviation with reverse polarity does not exceed 10 V. If you believe the reviews of experts, the brand is often used for vertical welding. It can be used to connect the pipeline. Separately, it should be noted that the electrodes showed themselves well when working with a ceiling joint. There is an average packaging for 1.5 kg in the region of 400 rubles.

monolith electrodes manufacturer

Electrodes "UONI-13/55"

The indicated electrodes "Monolith" reviews frombuyers get positive. First of all, it should be noted that they are used for metal surfacing. In this case, spraying is provided insignificant. Low sensitivity to dirt allows you to work with structural steel. For welding short arc mark can be used. She has little sensitivity to edge preparation. For overlap connections, electrodes fit well. The average consumption is 1 kg of product per 1.4 kg of metal.

The maximum voltage deviation is 4.5 V.Coverage brand used mixed type. Electrodes of great thickness are suitable for welding metal. If you believe customer feedback, then when working with electrodes, it is important to consider the permissibility of overheating. For pipelines brand is suitable. The nominal voltage with a direct polarity is 55 V. The deposition rate of the mark does not exceed 6 g. You can purchase these Monolith electrodes in stores for as low as 500 rubles.

welding electrodes monolith

Description of the brand "Monolith E38"

Many buyers give positive comments about theseelectrodes. They are used for arc welding. They are capable of working with structural steel. Spraying in this case is insignificant. For vertical welding, the mark is suitable. The consumption of electrodes in this case does not exceed 1 kg per 1.5 kg of metal.

Для стыковых соединений электроды редко apply. The sensitivity to the preparation of the edges they are quite high. The deposition rate in this case is at the level of 6 g. The brand tolerates the maximum voltage deviation of 5 V. The coating in this case is of rutile type. The maximum angle of inclination of the electrode does not exceed 70 degrees.

If you believe customer reviews, you shouldavoid slagging. The diameter of the presented brand is 2.5 mm. In turn, the indicator of temporary resistance is equal to 340 N per square meter. mm The relative elongation in this case is at the level of 20%. Impact strength of the presented electrodes does not exceed 77 J per square. see. You can buy them at a price of 450 rubles.