Clothes hanger can do it yourselfbe easily executed. It is often used not only in residential apartments and houses, but also in offices. Of course, such an item can be purchased at the store of the relevant goods, but quite often the cost of the hanger is high and not all models are suitable in color and size. This item is an excellent solution for a hallway that does not have enough free space. Such designs, which are available for purchase in the store, most often have two sides for free access (out of four). A hanger for clothes is devoid of such shortcomings; it is easy to purchase and strengthen it. Often, in its manufacture using available hooks that are as close as possible, it subsequently complicates access to the other parties. In the end, the floor hanger is loaded on one side, which quite often becomes the reason for its fall. This is due to the fact that the structure has too high a center of gravity. You may have noticed that not all hangers have hooks for hats and bags. That is why you can come up with your own design, while taking into account all the shortcomings of factory products.
Preparation of materials and tools
Clothes hanger can do it yourselfbe performed by any novice master. However, initially it is necessary to prepare a set of tools and materials, among them: screws, sandpaper, chipboard, swivel mechanism, confirmat, jigsaw, as well as the edge.
Design features
Итак, ваш выбор - напольная вешалка для одежды.With your own hands making it, you can save, because the models presented in stores are quite expensive. However, before the start of manufacturing, it is necessary to develop a design project, and you should take into account the problems described above. This will allow you to get a hanger, which will be different functionality and ease of use. The base of the product will be hollow parallelepipeds, which must be installed on the basis of a swivel type. It has two planes. The turning mechanism should be between the supporting bases, which are located at the bottom. Accessories can be purchased in a specialized store. The mechanism should have bearings that will provide turning with a load that weighs up to 110 kilograms. The support base in the upper plane can be rounded, using a jigsaw for this.
Preparation of parts
Если вами будет изготавливаться напольная вешалка for clothes with your own hands, you will need to initially prepare the details. The design is assembled using chipboard, the thickness of the material should be 16 millimeters. Color is selected depending on the features of the interior and other furniture items that are in the hallway. When preparing the details, it is important to observe the right angles, so experts advise ordering the cutting of items from professionals, but gluing the edges can be done independently.
Kromkovanie
Before making a coat hanger, youmust learn how to glue the edges. It has a glue base and can be melamine. Its thickness is 0.5 mm or less. The edge is applied to the end of the element, the adhesive base should be facing down. Then - ironed iron, which should not be heated. Until the edge has cooled, it is smoothed using dry rags. In the next step, the ribs are machined, the excess edges will need to be removed with sandpaper and a sharp knife.
Sizes of blanks
In order for you to get a hanger onWheels for clothes, you will need to prepare the bottom base of a square shape with a side of 560 millimeters. The upper base should have a side equivalent to 380 millimeters. The side elements of the lower part are made in an amount of 2 pieces, the dimensions of each should be 600x300 millimeters. All other parts are performed in an amount of 2 pieces, this applies to the inner side elements that make up the lower part. The dimensions of each given billet must be equal to 600x267 millimeters. The top and bottom will be square with a side of 267 mm. Similar parts are made with a side square of 167 millimeters.
Side elements should have dimensions equal to 1200x200 millimeters. The sides of the inside of the top have dimensions that are 1200x167 millimeters.
Assembling
Металлическая вешалка для одежды может быть вами purchased in a store - it's easier to make than to make it yourself. But if you decide to make yourself the floor construction of wood, then for the assembly you need to use confirmatics with dimensions of 50x70 millimeters. For them, pre-prepared holes located at the ends. To do this, use a 5 mm drill bit. The depth of the holes should be 60 millimeters. Holes in the plane should have a depth equivalent to 8 millimeters. Make them necessary through. No need to fear that the fastener heads will be visible - then you can hide them using plugs. You can also make a wall hanger with your own hands. To do this, prepare the bar from laminated chipboard, a few hooks and fasteners. All these components are interconnected, and after the design is hung on the wall. In the case of a floor construction, everything is different. The hanger will spin due to the presence of a swivel mechanism, it is fixed with 4x16 mm self-tapping screws.
Work Tips
The swivel mechanism has a one-piececonstruction, and its attachment to the base is made by creating technological holes with a depth of 10 millimeters. Initially, to make markup. After the hanger is assembled, fasteners will be hidden by the upper plane. The hanger can be supplied with different hooks. Thus, the upper ones may be longer, which allows them to be used for hats. The middle ones are meant for children's clothes, but as far as the lower ones are concerned, bags can be placed on them. The design is stable due to the fact that the center of gravity moves closer to the floor surface.
Alternative option
Clothes hanger wall in the hall toocan be done by you. To do this, you need to prepare a board, timber, and hooks. The board should have the following sections: 25x150, 50x100, and also 25x80 millimeters. As for the timber, it should have a square section with a side of 100 millimeters. The base will be a timber, which is marked with the necessary length and cut off. If the hanger is not wall-mounted, but floor-standing, then legs should be attached to it. The design is necessarily processed with sandpaper. If legs are provided, they should have a length that is 350 millimeters. The legs on one side are cut at an angle of 45 degrees, which adds aesthetics. On their edges should be coasters that are fixed. These additional blanks are cut from the board, the cross section of which is 25x80 millimeters.
Strengthen legs can be elements of a length of 330millimeters. These blanks are made of 50x100 millimeters of board. There should be four of them. When the wall-mounted clothes hanger is made in the hallway, the upper part can be made more elegant by decorating it with a decor that is made of a 5-centimeter board. Timber goes on cutting the square, which is screwed to the top of the base with two screws. The workpiece is strengthened with the help of accessories, however, if you want to make a decorative element yourself, then it should be deprived of fasteners for screwing. In this case, the blank is glued with the help of joinery.
Final works
When making clothes hangers in the closet,It is important to provide quality hardware. Quite often not only mechanical, but also adhesive method is used. In the latter case, both surfaces should be lubricated with wood glue. After that, the design is left to complete drying of the composition and only then it can be treated with varnish or stain. The mixture is applied in several layers, between each of which the product should be left until it is completely dry. After the surface is treated with sandpaper. Before proceeding with the application of the next layer, the surface should be wiped with a damp cloth. In the process of making hangers for clothes in the closet, the above presented technology can be used. However, whatever design you choose, if it is based on wood, all corners are to be stripped, the same applies to the ends of the structure. This can be done between the application of layers, then the surface will acquire the effect of antiquity.
